TVXL840-8489J Tecumseh Engine - Overview

This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces. It is sold individually.

The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle a...Read morend crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The metal hex nut is used to fasten the engine's flywheel to the crankshaft assembly. This item is available as an individual replacement part, please see diagram for related items.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with small engines from Tecumseh and Toro. The gasket is used to seal the connection between the cylinder and the muffler assembly. This item is available as an individual replacement part.

This is an authentic replacement part manufactured for use with lawnmower engines. The bowl drain washer is used to seal the connection between the bowl drain screw and the float bowl. This bowl drain washer is available as an individual replacement part, please see model diagram for associative parts.