TVS600-661085U Tecumseh Engine - Overview

This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces. It is sold individually.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is an authentic item which is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is a special gasket which helps to provide a tight seal for the air cleaner, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable rubber and is sold individually.

This 1/4-20 screw is 1/2 inch long and fits select small gasoline engines. It is often used to secure the blower housing, engine shroud, or another cover. Replace it if it is missing, bent, rusty, or has damaged threads. Use the exact engine model and specification numbers to guarantee the proper fit. Check the product listing to confirm ...Read morethe quantity and whether a washer is included. Let the engine cool and disconnect the spark plug wire before repair. Start the screw by hand, then tighten it with the correct tool.

This recoil starter assembly turns the engine when the starter rope is pulled. It contains the housing, pulley, rope, spring, and starter parts needed to engage the engine. Replace it if the rope breaks, will not pull, will not rewind, or slips without turning the engine. Use the complete engine model and specification numbers to guarante...Read moree the proper fit. Check the product listing because the pull handle and mounting screws are not included. Let the engine cool and disconnect the spark plug wire before repair.

This is an OEM part sourced directly from the manufacturer. The ring set is commonly found in snow throwers from Toro and engines from Husqvarna. This is a set of two metal rings which are inserted into grooves on the outer surface of the piston to help seal it inside the cylinder. You may require pliers and a screwdriver when replacing this item.

This is an original replacement part sourced directly from the manufacturer. The cylinder head gasket is commonly found in Toro snowthrowers. This part is placed between the cylinder and the cylinder head to prevent inadvertent leakage. You may require a torx screwdriver when replacing this item. The cylinder head gasket is sold as an individual replacement part.