TR530 (2013-03) Husqvarna Tiller - Overview

This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable t...Read moreo corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.

Measuring approximately 1-inch in length, this handle lock is designed for use with various models of tiller machines. This handle lock is fastened to the base of the handle to secure the lock lever and is a genuine OEM metal part. This part is sold individually, so depending on your model, you may need 2 of them. Be sure to check your user manual or any diagrams for confirmation.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This needle bearing is sourced from the original equipment manufacturer for use in lawn and garden equipment. It is a cylindrical roller that allows the rotating parts such as the drive shaft to move smoothly and avoid friction damage. The bearing is made from steel and designed to withstand heavy loads, and harsh outdoor conditions. Over...Read more time the bearing may wear down from lack of lubrication, or damage from the heavy loads and impacts. If the needle bearing is faulty, you will notice excessive vibration, grinding and squeaking noises, and overall lower performance from your equipment. Carefully remove the old bearing from your equipment using bearing pullers and clean the area thoroughly to ensure a good fit for the new bearing. Lubricate the new bearing and press it into position to complete your repair.

This is an OEM part sourced directly from the manufacturer. The crownlock nut is commonly found in Craftsman lawn tractors and lawn mowers. This part is made of metal, and is generally used to secure the link on the suspension arm. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure...Read more of ordering the correct part. You will require a wrench when replacing this item. This product is available as an individual replacement part.

t is an authentic replacement bearing that is supplied by the original equipment manufacturer for use with garden tillers. Needle bearings are used to reduce friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Symptoms of a faili...Read moreng bearing may include squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This is an authentic OEM part. The pin spirol flared is compatible with Husqvarna rear tine tillers, and is sold individually. This metal item helps to fasten the lever assembly on the left hand main frame. A screwdriver and pliers may be helpful with the repair.

This needle roller bearing is a precision-engineered component designed to support smooth rotational movement within transmission and gearcase assemblies. Built with a compact design featuring cylindrical rollers, it reduces friction and handles heavy loads in high-speed applications. Manufactured from durable, wear-resistant materials, i...Read moret helps minimize mechanical wear while maintaining efficient power transfer between moving parts. Ideal for replacing worn or damaged bearings, it restores reliable operation and extends the service life of equipment operating under demanding conditions.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special needle bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This needle bearing is available as an individual replacement part.

This shift fork spring is found in your outdoor power tools. It helps you to control the speed and power of your machine by engaging and disengaging the gears in the gearbox. When the spring is broken, your machine will make grinding noises or jerk when you try to shift gears. If you overlook a damaged spring, it may lead to severe damage...Read more to the gear mechanism, which can result in costly repairs later. To remove the spring, start by turning off your machine and disconnecting the spark plug. Once you have access to the gearbox, locate the spring. It Is usually connected to the shift fork mechanism, but since the location can vary depending on the model and make of your machine, you will need to consult your user manual. Use pliers or a screwdriver to gently release tension on the spring. This may involve carefully compressing it or unhooking it from specific attachment points. Please be aware that this OEM metal spring is sold individually and is not included with the shift fork.

This item is available as an individual replacement part. The shifting arm attaches to the o-ring and is made of metal. A set of pliers might be required during the replacement of this part. It will need to be replaced if it becomes broken. This genuine item is supplied by the original equipment manufacturer for use with tillers, ride mowers, and cultivators made by Husqvarna, Poulan, Weed Eater, and Jonsered.