TPJ24BIBAWW General Electric Refrigerator - Overview

Diagrams for TPJ24BIBAWW

See every part. Know exactly what you need.

Parts for the TPJ24BIBAWW

$57.38

Dual Inlet Water Valve

★★★★★

(17)

Part #WR57X10051

This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.

$18.22

Bearing Slide

★★★★★

(3)

Part #WR1X2048

Sold individually.

$21.95

Light Bulb - 40W

★★★★★

(10)

Part #40A15

This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.

Screw

Part #WR01X10038

This screw is sold individually. Size 8 -18 ab fltr 5/8.

$15.00

1/4 Tubing Nut

★★★★★

(4)

Part #WR57X57

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part is to connect the lines that supply water to your ice maker and water dispenser. The most common reason or needing to replace this part is if fluid is leaking ...Read more

Read less

$48.45

Door Closure Spring

★★★★★

(1)

Part #WR1X2027

Crisper Drawer Frame

★★★★★

(3)

Part #WR17X10542

This frame is attached to the front of the crisper drawer.

Vegetable Pan - Upper

★★★★★

(2)

Part #WR32X1461

The front part of this pan is not included. Must order separately.

$15.00

Refrigerator Grommet

★★★★★

(1)

Part #WR02X22869

$37.15

Screws - 12 per package

Part #WZ4X241D

Size - 8-18 ab

$15.00

WZ04X0408

Part #WZ4X416

Egg Holder Bucket

Part #WR32X1435

Common Symptoms of the TPJ24BIBAWW

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Ice maker not making ice

Door won’t open or close

Fixed by
these parts

Show All

Ice maker won’t dispense ice

Fixed by
these parts

Show All

Videos related to the TPJ24BIBAWW

Watch our pros, then fix it yourself.

Replacing the Dual Inlet Water Valve

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Cracked housing on the vaave

288 of 308 people found this instruction helpful.

anthony from thornton, CO
Really Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)

1. Turn off water supply, and electrical ( unplug it) to fridge.
2. Remove water line to valve. Watch for water to pour out of the line. Have a towel handy.
3. Remove the cardboard cover on the bottom of the fridge.
4. Remove the screws that hold the valve in place.
5. Remove the valve, be careful the waterlines ar ... Read more

Read less

Was this helpful?

low flowing water (not just a drip) from refrigerator ice maker

23 of 30 people found this instruction helpful.

Theresa from Rochester, MI
Easy
30 - 60 mins
Pliers, Screw drivers, Wrench (Adjustable)

The icemaker's valve is easy to inspect and test. First, gently pull the refrigerator away from the wall, and unplug it. Turn off the water supply to the icemaker by closing the shut-off valve in the copper waterline leading to the valve. Use a screwdriver or nutdriver to remove the rear lower access panel from the refrigerator's back. ... Read more r />
Next, remove the fill tubing from the water valve. Use a wrench to loosen the flare nut on the brass fitting on the inlet side of the valve (above). Place a container or towel under the valve to catch the small amount of water that will spill from the valve and tubing.

Now use a screwdriver or a nutdriver to remove the screw holding the valve's mounting bracket to the refrigerator cabinet. Pull the valve out of the compartment and remove the tube (or tubes if both water dispenser & ice maker) on the valve's outlet. If plastic tubes don't come out with pliers and assuming there is enough extra tubing, then cut the plastic tubing with a even straight cut edge razor. Then, remove the solenoid's electrical contacts.

Push the plastic water and ice tubes int he appropriate holes in the new valve outlet, reconnect solenoids and remount new water valve.

Before installing the back panel on the refrigerator cabinet, test run the icemaker. Look for leaks, and tighten any leaky connections. If necessary, use Teflon tape or a similar product to ensure tight connections. Discard the first ice cubes that are produced because they are likely to have sediment in them.
Read less

Was this helpful?

Thank you for voting!

Water Leak From The Ice Make - Water All Over The Frig

14 of 15 people found this instruction helpful.

David T from Irvine, CA

Easy

15 - 30 mins

Nutdriver, Screw drivers, Wrench (Adjustable)

Replace the old water valve (wr57x11) with the new one (wr57x10051: make sure you unplug the 110 ac power . And close the water come to the refrig. First 1. Open the paper panel on the back with screw driver. 2 Use a small adj. Wrench to take the old valve of. 3. Label the connector and its terminals in a proper number to ident ... Read more ify their connector. 4. Unscrew 2 water hoses - one to the drinking one to the ice maker. They are in diff. Sizes - make sure to mark where the hoses connected in case you need to use it again. 5. Cut of the thread section on the hose end - you do not need thread any more on the new water valve. 6. Make sure the new valve is in the same position as the old one. Then plug the water hoses to the valve - and connector terminals. There are 2 new terminal adapter in your new package. These new adapter will be fit to the old hardness for connecting to the new valve. 7. Secure the valve onto the refig frame then plug in the water hose to make sure no leak at the valve. The new valve has new type of self-lock plug ( not thread ) to the 2 water hoses. Make sure to press hard so the hoses are fit in to these new water . Valves. Turn on the water and power on on the refrig. That's all. Very simple save $300 for hiring the service man. Good luck to all.
Read less

Was this helpful?

Thank you for voting!

View More