TNX22PACBLBB General Electric Refrigerator - Overview

Diagrams for TNX22PACBLBB

See every part. Know exactly what you need.

Parts for the TNX22PACBLBB

$16.05

Door Hinge Nylon Washer

★★★★★

(2)

Part #WR01X27364

This is the replacement hinge washer for your refrigerator. The hinge washer is mounted on the top of the door hinge pin, and supports the refrigerator door, allowing it to open and close easily. The main reason you would need to replace the hinge washer is if it is worn out, causing the refrigerator door to be more difficult to open and ...Read more

Read less

$252.05

Condenser Fan Motor - 115V

★★★★★

(6)

Part #WR60X187

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

$15.00

Ice Cube Tray

★★★★★

(1)

Part #WR30X311

14 Cube.

$15.30

Screw

Part #WD2X425

10-12 x 1/2 inch - Sold individually.

$48.45

Door Closure Spring

★★★★★

(1)

Part #WR1X2027

Evaporator Motor Kit

★★★★★

(2)

Part #WR60X203

This part is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air which is then circulated.

$16.05

SCREW

Part #WD2X5166

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

$15.00

Refrigerator Grommet

★★★★★

(1)

Part #WR02X22869

$37.15

Screws - 12 per package

Part #WZ4X241D

Size - 8-18 ab

$21.81

WHEEL MOBILITY

Part #WR02X10480

Fresh Food Door Shelf

Part #WR71X10166

Egg Holder Bucket

Part #WR32X1435

Common Symptoms of the TNX22PACBLBB

How this model fails, and the parts that fix it.

Door won’t open or close

Freezer section too warm

Fixed by
these parts

Show All

Videos related to the TNX22PACBLBB

Watch our pros, then fix it yourself.

Replacing the Condenser Fan Motor - 115V

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Panel hot to touch between freezer & refrigerator. Motor hot, fan not rotating.

32 of 39 people found this instruction helpful.

Kimberly from Grandy, NC
Really Easy
15 - 30 mins
Screw drivers

Unplugged refrigerator, removed three screws to take out part, disconnected the wires and removed bad unit. Removed fan blade from old unit and attached to the new unit. Attached wires, placed the new motor back in. Plugged it back in, within 20 minutes panel between freezer and refrigerator was cool to touch.

Was this helpful?

Compressor overheating - Fridge not Cooling

16 of 19 people found this instruction helpful.

CHRIS from LAGUNA NIGUEL, CA
Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers

Condensor Fan not turning. I thought it would be an easy fix. I thought I could pull off the shroud and fan assy - no joy. Too many copper pipes and lots of tubing in the way. It took 90 minutes to remove and 30 minutes to install. The BIG hint here is to loosen the shoud, pull it back as far as you can and then remove the nut that holds ... Read more

Read less

Was this helpful?

Noisey Motor, Bearings Out, Dying

12 of 13 people found this instruction helpful.

PERRY from VANDERBILT, MI
Easy
More than 2 hours
Nutdriver, Wrench set

Remove back cover, exposing fan motor. Turn off power, remove nut on fan blades. Remove fan carefully, do not bend. Unhook wiring harness. Remove three screws that hold the motor on the back frame. Remove old motor, install new. Carefully, reinstall fan blades, hook up wiring, and your ready for tryout. Also do some cleaning whil ... Read more

Read less

Was this helpful?