TM6000X31A Murray Edger - Overview

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

The latching control cable engages and disengages the cutting head of your trimmer. It is sold individually and is manufacturer-certified as an OEM part. It is made of metal with a rubberized coating, and can become stretched, broken, or otherwise damaged over time, which will cause you to lose control of the cutting head.

This is an authentic replacement part manufactured for use with Murray string trimmers. The intermediate ring is commonly used to prevent dust from entering the motor as is located at the connection between the gear housing and the armature bearing. The intermediate ring is available as an individual replacement part, please see model diagram for associative parts.

The Debris Flap is a plastic part used to deflect trimmings and debris. It is individually sold, comes in black, and is rated as "Easy" to install. You will only need a Screwdriver to install it. You'll know if you need a new one if trimming and debris are flying everywhere, as this means the part is broken, damaged, or missing altogether...Read more. Refer to your make, model, and diagrams to find the right part. It will attach directly to the guard.

Pulley engine 3l - t

The Engine Shroud is an individually sold, black part. This part offers protection from debris, and prevents your hands from getting into the moving parts of the engine while it is running. Its installation is rated as "Easy" by our customers, and you'll need a screwdriver and socket set to install it. It is installed to the top of the en...Read moregine. You'll know if you need a new one if it is visibly damaged or worn out. Refer to your make and model to ensure you're choosing the right part.

This is an authentic Murray replacement part, sourced from the original manufacturer for use with field trimmers. The metal pulley is used to connect the drive belt and the cutting head assembly. It is recommended to inspect the belt when servicing the pulley as a damaged pulley may affect the belt. This item is available as an individual replacement part.

Weed wrap upper nylon