TLE-500 Tanaka Edger - Overview

This is an authentic OEM sourced replacement part commonly utilized on Hitachi and Tanaka handheld lawn and garden equipment. The purpose of a spark plug is to deliver electric current to an internal combustion engine. Symptoms of a failing or faulty spark plug include difficulty starting the saw or a complete failure to start. Please not...Read moree, this item is sold individually. You would need a spark plug wrench or a socket wrench to complete this repair.

This is an original Tanaka replacement part. The nut is designed by the manufacturer for use in edgers, generators, brushcutters, and scooters. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diag...Read moreram to be sure of ordering the correct part. You will require a wrench when replacing this item. This product is sold individually.

This is an authentic Tanaka replacement part that has been sourced from the original manufacturer to be used with bike engines, chainsaws, blowers, gas powered drills, edgers, generators, trimmers, and powered augers. This screw is used with a variety of different types of machines and the application of the screw can vary based on the model of the equipment. The screw is available as an individual replacement part.

This is a genuine Tanaka replacement part, sourced directly from the manufacturer. The oil seal is found in many Tanaka power tools such as chainsaws and brush cutters. This part is a metal ring with a high-quality plastic inner ring, and is used to prevent oil leaks or contamination of the crank case. You may need a screwdriver and wrench to replace this part. This item is sold individually.

Piston pins, also known as wrist or gudgeon pins, are designed to connect the connecting rod to the piston, and act as a pivot for the piston to move up and down in the cylinder, whilst being connected to the rod. This pin measures 35mm long, has a 10mm diameter, and is designed for use within various models of small engine equipment and ...Read moreis sold as an individual OEM part. If you notice poor engine performance, any unusual sounds like knocking or rattling coming from the engine, or excessive movement within the piston upon inspection, it needs to be replaced immediately. You can prevent a piston pin replacement with proper maintenance such as adequate lubrication and regular inspections. To replace the piston pin, you will need tools specific to your equipment model, but you need to disassemble the engine, remove the piston from the connecting rod, and replace the piston pin.

This circlip is a part from the original manufacturer that is compatible with several different types of small engine lawn equipment models. Made of high-quality metal, this clip connects and secures the piston pin to the piston and is sold as an individual part. To replace this clip, you will need a screwdriver and/or socket wrench to access the piston, and pliers to remove the clip itself.?

This authentic component is supplied directly from the original equipment manufacturer for use with Tanaka lawn and garden equipment. The cap is used to connect the spark plug to the magneto. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this cap spark plug assembly. Keep in mind one durable rubber cap and a metal spring are included.

It is a genuine manufacturer-sourced replacement gasket which is specially designed for use with Tanaka lawn and garden equipment. This gasket provides an air-tight seal for the muffler, over time it may wear out and crack eventually requiring a replacement. It is made of high-quality metal and it is sold individually.

This genuine manufacturer sourced replacement component which is specially designed for use with Tanaka and Hitachi handheld lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure the proper fit. This is a standard hardware which has multiple applications based on the model of your unit, pl...Read moreease refer to appropriate diagrams for the correct location and use of this part. It is made of high-quality metal and it is sold individually.