My Orders
TFF24AEB General Electric Refrigerator - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$34.93
In Stock
Evaporator Fan Blade Kit
Part #WR60X114
This kit features a 5-blade plastic evaporator fan blade that rotates CCW and measures 4.5-inches in diameter and has a 3/8-inch-tall shaft. This kit also has a metal compression ring that secures the fan to the evaporator. The evaporator mechanism is normally located in the freezer and is responsible for pulling the warmer air over the c...Read moreondenser coils, cooling it off and then blowing and circulating that cooler air through the rest of the refrigerator. If the freezer compartment has a frost buildup or if there is a lack of cooling and airflow in your refrigerator, this fan likely needs to be replaced. To replace your evaporator fan, you will likely need a screwdriver and a set of pliers and check your user manual for the exact location of your evaporator fan.
Read less
No Longer Available
EVAPORATOR FAN MOTOR KIT
Part #WR60X30349
This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.
$175.96
Special Order
Condenser Fan Motor
Part #WR60X177
This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.
No Longer Available
Single Water Valve
Part #WR57X77
This single outlet valve comes with a gasket, and is intended for refrigerators that have ice makers which make round ice cubes. If the ice maker is still not working properly, the issue could be that you have a damaged, or faulty water inlet valve. The water inlet valve supplies the water needed to the ice maker. Before you decide to rep...Read morelace this part, turn the household water supply to this valve off, and remove the input tubing to see if it is clogged. If it is, clear the blockage to allow water back into the ice machine. Remember to disconnect the power and water supply to your refrigerator before beginning this repair.
Read less
No Longer Available
Cut to Fit Door Gasket Kit - Gray
Part #WR24X433
This gray door gasket kit is cut to fit your refrigerator, though some assembly is required. Use it for your GE brand refrigerator.
No Longer Available
Cold Control Thermostat
Part #WR9X405
This cold control thermostat cycles on and off regularly to keep your refrigerator cold.
$65.73
Special Order
DEF CONT Package
Part #WR9X331
No Longer Available
Replacement Ice Maker Assembly
Part #WR30X253
This replacement ice maker assembly is used on many of GE's refrigerators. This assembly makes round ice cubes, but does not come with a new feeler arm. You will have to re-use the feeler arm from your old ice maker assembly.
No Longer Available
General Electric Refrigerator/Freezer Repair Manual
Part #WX10X110
Make repairs on your own using this instructional manual from GE. This manual includes step-by-step photos, diagnostic charts, preventative maintenance, and easy to follow instructions.
$69.91
Special Order
SWITCH
Part #WR23X142
No Longer Available
DISCONTINUED
Part #WR32X493
No Longer Available
DISCONTINUED
Part #WR49X394
Common Symptoms of the TFF24AEB
How this model fails, and the parts that fix it.
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noisey fan/motor (bad motor bearing ?)
37 of 46 people
found this instruction helpful.
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.
Other Parts Used:
Was this helpful?
Thank you for voting!