TF291201 (2003) Campbell Hausfeld Compressor - Overview

This replacement regulator/manifold manifold assembly is specially manufactured for Campbell Hausfeld air compressors. The manifold kit consists of the manifold, the regulator, two pressure gauges, two quick-disconnects, and the nipple that connects the entire assembly to the air tank. The manifold kit will solve any problems related to a...Read more cracked manifold assembly, as well as any problems with the regulator. To complete this repair job correctly you may need : Phillip's screwdriver, hex drivers, long-nosed pliers, wrenches and heavy-duty wire cutters. • Depressurize the tank • Remove the manifold cover • Remove the pressure hose • Remove the pump assembly from the tank • Remove the manifold • Remove the manifold nipple • Transfer the safety valve • Install the new manifold kit • Secure the the pump assembly • Reinstall the hose • Reattach the manifold cover • Ensure everything is connected and test the compressor

This part is an OEM from Campbell Hausfeld. The drain cock-npt 3/8 is compatible with many air compressors, and is sold individually. The metal component allows the operator to drain the condensation out from the compressor tank. Located at the base of the tank, a wrench set is required for the replacement. Please be sure to refer the manual for further safety and repair instructions.

This is a genuine manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld air compressors. The o-ring provides an air-tight seal between connected parts, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear...Read more out and begin to crack eventually requiring a replacement, keep in mind this high-quality rubber o-ring is sold individually.

It is a genuine replacement part that is supplied by the original manufacturer for use with Campbell Hausfeld air compressors. The discharge tube transfers air between the cylinder and the tank on an air compressor. Over years due to regular wear and vibrations the ends of the outlet tube may begin to crack and leak eventually requiring r...Read moreeplacement. It is a complete assembly which includes a durable metal discharge tube with two nuts and one ferrules.

This tube fitting provides a secure connection point for tubing, helping ensure reliable flow and leak-free operation. It is commonly replaced when fittings loosen, crack, or show signs of wear.

Sourced directly from the manufacturer, this plug is an exact replacement part for a variety of air compressors. This part is sold individually, not as part of a kit or assembly. It is gold, made of metal, and will be found on the pressure switch. This part will leak when it has become defective and will need to be replaced if it is dam...Read moreaged or worn. When you install the part, apply Teflon tape to the threads before tightening it in place. You will need a wrench to complete this repair. Customers rate this repair as Easy.

The ferrule goes next to the o-ring. This authentic item is supplied directly from the original equipment manufacturer for use with compressors made by Campbell Hausfeld. This part is made out of metal and is priced individually. A wrench might be helpful during the installation of this part. It will need to be replaced if it breaks.

This item is a genuine Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The filter kit is a complete part assembly that includes the filter, case, and the wing nut that secures the cover. This kit is sold complete with all the items that are in the photo.