Models > TEC3X3XCD3

TEC3X3XCD3 Tappan Cooktop - Overview

Sections of the TEC3X3XCD3

[Viewing 4 of 4]
CONTROL PANEL Diagram and Parts List for Tappan Cooktop
CONTROL PANEL
COVER Diagram and Parts List for Tappan Cooktop
COVER
MAINTOP / SUFACE UNITS Diagram and Parts List for Tappan Cooktop
MAINTOP / SUFACE UNITS
WIRING DIAGRAM Diagram and Parts List for Tappan Cooktop
WIRING DIAGRAM
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 8" – Part Number: 316048413
Drip Bowl - 8"
★★★★★
★★★★★
(100)
PartSelect #: PS437595
Manufacturer #: 316048413
This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits benea...
$12.59
  In Stock
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit
★★★★★
★★★★★
(37)
PartSelect #: PS470125
Manufacturer #: 5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If y...
$16.24
  In Stock
Drip Bowl - 6" – Part Number: 5303280336
Drip Bowl - 6"
★★★★★
★★★★★
(3)
PartSelect #: PS459618
Manufacturer #: 5303280336
This part is located beneath the heating element on your range, and is designed to catch any spills. If your current drip bowl is worn or stained, consider replacing it. This heavy chrome drip bowl is...
  No Longer Available
Surface Burner Coil Element - 8" - 2100W – Part Number: 5308011964
Surface Burner Coil Element - 8" - 2100W
★★★★★
★★★★★
(2)
PartSelect #: PS473948
Manufacturer #: 5308011964
$152.66
  In Stock
Surface Indicator Light - 250V – Part Number: 316022503
Surface Indicator Light - 250V
PartSelect #: PS436963
Manufacturer #: 316022503
$55.56
  In Stock
LENS – Part Number: 318228301
LENS
PartSelect #: PS1765367
Manufacturer #: 318228301
$16.75
  Special Order
Hex Nut – Part Number: 5303013272
Hex Nut
PartSelect #: PS453400
Manufacturer #: 5303013272
$14.79
  Special Order
BUSHING – Part Number: 318146010
BUSHING
PartSelect #: PS443802
Manufacturer #: 318146010
$15.58
  In Stock
Surface Burner Switch – Part Number: 318120500
Surface Burner Switch
PartSelect #: PS443489
Manufacturer #: 318120500
$145.74
  Special Order
WIRE TIE – Part Number: 5304464772
WIRE TIE
PartSelect #: PS2333714
Manufacturer #: 5304464772
$10.59
  Special Order
ELEMENT – Part Number: 5303299749
ELEMENT
PartSelect #: PS462725
Manufacturer #: 5303299749
  No Longer Available
SCREW – Part Number: 131892100
SCREW
PartSelect #: PS418977
Manufacturer #: 131892100
$9.91
  In Stock
View More
Back to Top

Questions And Answers for TEC3X3XCD3

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the TEC3X3XCD3

[Viewing 3 of 3]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Terminal Block Kit

Replacing the Terminal Block Kit

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old pans/bowls were corroded
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Parts Used:
Drip Bowl - 6" Drip Bowl - 8"
  • John from Nisswa, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
48 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
corroded terminals
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff
Parts Used:
Terminal Block Kit
  • Gary from hollywood, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old discolored drip pans that would not clean up.
I simply removed the old drip pans and inserted the new ones which matched and fit perfectly.
I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks.
Parts Used:
Drip Bowl - 6" Drip Bowl - 8"
  • Elizabeth from Smyrna, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top