This plastic ice cube tray holds water for freezing into 12 cubes at a time. Channels help water spread evenly during filling, while corner supports allow trays to stack securely in the freezer. The tray measures approximately 11 inches long and 4.5 inches wide and is sold individually. Its flexible design allows frozen cubes to be releas...Read moreed by hand. Cracks or splits may let water leak before it freezes and are reasons to replace the tray. Check the available freezer space against the tray dimensions before ordering. This is an OEM part sourced directly from the manufacturer.
This is a door/light switch and it is a replacement part for your refrigerator. This part is activated as you open and close your refrigerator door. When the switch is activated and the door is open it will turn the light on inside your appliance, and when you close the door the switch will deactivate the light. Before purchasing this par...Read moret, you may test it for continuity to determine if your current switch is defective and needs replacing. This model is white in color and measures to be roughly one inch thick, almost two inches high, and almost 1.5 inches deep, with a male end plug.
This limiter refrigerator thermostat cuts out when the temperature inside your refrigerator reaches fifty degrees Fahrenheit and kicks back in when the internal temperature drops to twenty degrees Fahrenheit. Use it for your Frigidaire/WCI brand refrigerator.
This refrigerator defrost timer will cycle for twenty-one minutes after every six hours of run time. Use it for your Frigidaire/WCI brand refrigerator.
A cold-water connection to the ice maker is the job of this 6-foot stainless steel waterline. This OEM installation kit includes a 1/4-inch compression union and thread sealant. Turn off the cold-water supply before installation. After restoring the supply, inspect the connections for leaks. Avoid kinking the line or overtightening the connections.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Erratic light.
9 of 11 peoplefound this instruction helpful.
D KIRKE from CORVALLIS, OR
Really Easy
Less than 15 mins
Simple switch repair: Unplug fridge, pull down to remove switch assembly, slip contacts off. Reverse with replacement switch. HOWEVER, check first to see if the bulb filament might be broken, as this could cause the same symptom. OR in my case, the light socket connection was the culprit. Check that too before ordering a replacement s
... Read morewitch.