TC507B1 Jenn-Air Trash Compactor - Overview

Diagrams for TC507B1

See every part. Know exactly what you need.

Parts for the TC507B1

$27.36

15 Inch Compactor Bags - 15 Pack

★★★★★

(5)

Part #W10165295RP

Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from tough 2.5-millimeter, multi-laminate plastic, and the patented Slip-Grip design prevents the bag from slipping into the compactor bin. They ...Read more

Read less

$77.75

Drive Gear Kit

★★★★★

(60)

Part #882699

This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop at the end of its cycle, the driving gear may be the issue. The gear is white, plastic and approximately 4.5 inches in diameter. This drive...Read more

Read less

$6.40

Washer Front Leveling Foot

★★★★★

(5)

Part #WPW10001130

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause...Read more

Read less

$40.02

15" Compactor Bag Carrier with Easy Grip Handles

★★★★★

(10)

Part #13030RP

This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carrier in the garbage can before placing a new compactor bag in the bin. The easy-grip handles make removal easier once the bag is full. This pi...Read more

Read less

$57.38

Trash Compactor Directional Switch

★★★★★

(17)

Part #WP777811

This top limit and direction switch controls power to the trash compactor motor, it stops the motor when the ram reaches the top, a bad switch may cause the ram to get stuck, keep the motor running, or stop the compactor from starting, unplug the compactor before repair, check the model number before ordering

Touch-Up Paint - White

★★★★★

(7)

Part #72017

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more

Read less

$97.57

Rotary Switch Kit

★★★★★

(20)

Part #675382

The rotary switch kit is also known as the start switch or the on and off switch, and is used to power on your trash compactor. The function of the rotary switch kit is to control the electrical power that is going into your trash compactor. This process happens when the switch sendsvoltage to the motor to start the compacting cycle. If y...Read more

Read less

$130.65

Handle - Black

★★★★★

(9)

Part #WP9871267

Screws sold separately.

$58.42

15 Inch White Plastic Compactor Bags - 60 Pack

★★★★★

(2)

Part #W10165294RB

This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing. They are an environmentally-conscious product that are made of 50% post-consumer recycled material. The bags feature a Slip-N-Grip design ...Read more

Read less

$7.47

Refrigerator Screw

★★★★★

(1)

Part #WP489478

Sold individually.

$17.15

Drawer Roller

★★★★★

(6)

Part #WP9871602

This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your trash bin to allow the canister to roll free. For this repair you will need a nut driver, a pair of pliers, a screwdriver set, and an adjustable...Read more

Read less

$7.47

Trash Compactor Single Metallic Shoulder Screw Size 832 X 3\8

Part #WP780263

Sold Individually.

Questions And Answers for TC507B1

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Steve - For model number TC507B1

February 21, 2023

Part Number: WP777811 The small metal arm broke off can I replace that or do I have to replace entire thing

Hello Steve, thank you for reaching out. Based on our research, the metal arm is not sold separately. You are suggested to replace the whole switch, part number PS11744742. We hope this information helps!

$57.38

Trash Compactor Directional Switch

Was this helpful?

Rebecca - For model number TC507B1

July 12, 2025

Does PS398581 fit the foot pedal for a Jenn air trash compactor?

Hi Rebecca, thank you for the question. Yes, the foot pedal, part number PS398581, you have mentioned will fit into your model. We hope that helps!

$70.95

Foot Pedal

Was this helpful?

Common Symptoms of the TC507B1

How this model fails, and the parts that fix it.

Compactor ram gets stuck

Fixed by
these parts

Show All

Doesn’t stop at end of compacting cycle

Fixed by
these parts

Show All

Drawer is hard to open and or close

Fixed by
these parts

Videos related to the TC507B1

Watch our pros, then fix it yourself.

Replacing the Washer Front Leveling Foot

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Compactor stuck in lower position

68 of 84 people found this instruction helpful.

Asbjorn from The Woodlands, TX
Easy
1- 2 hours
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way. ... Read more r />Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Read less

Other Parts Used:

STOP CAP

Drive Gear Kit

Washer

Trash Compactor Bearing

Was this helpful?

Thank you for voting!

Trash Compactor ram wouldn't lower

46 of 54 people found this instruction helpful.

Scott from Indianapolis, IN

Easy

15 - 30 mins

Nutdriver, Screw drivers

I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical ... Read more directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Read less

Was this helpful?

Thank you for voting!

Change out defective switch

37 of 50 people found this instruction helpful.

Edward from Deerfield Beach, FL

Really Easy

Less than 15 mins

Screw drivers

Pulled out compactor drawer and removed same, slid the compactor cabinet out and unpluged the appliance. Removed the two phillips head screws to release the control panel. lossened the locking nut from switch. matched the switches to be sure parts were the same,switched the wires to the new switch and reinstalled.replaced phillips screws, ... Read more all Done !!!
Read less

Other Parts Used:

15" Compactor Bag Carrier with Easy Grip Handles

Rotary Switch Kit

Was this helpful?

Thank you for voting!

View More