TB14SVC General Electric Refrigerator - Overview

Diagrams for TB14SVC

See every part. Know exactly what you need.

Parts for the TB14SVC

$175.96

Condenser Fan Motor

★★★★★

(2)

Part #WR60X177

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

$96.17

Crisper Pan Cover

Part #WR32X5154

Door Shim Hinge

Part #WR2X9443

The shim hinge is located at the bottom of the refrigerator. It acts like a spacer between the refrigerator and the bottom hinge.

SWITCH LIGHT/LAMP PLUN

Part #WR23X10632

$64.76

R134 DRIER

Part #WR86X25269

The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.

Cold Control Thermostat

Part #WR9X208

This cold control thermostat has a temperature range from 37.5 degrees Fahrenheit to -10.5 degrees Fahrenheit, and a capillary length of 39 inches. This part helps to regulate the temperature within the cabinet.

$59.47

FAN BLADE

Part #WR60X117

DISCONTINUED

Part #WR7X106

DISCONTINUED

Part #WR74X204

$7.11

Compressor Overload

Part #WR8X30

DISCONTINUED

Part #WR24X267

DISCONTINUED

Part #WR2X4669

Common Symptoms of the TB14SVC

How this model fails, and the parts that fix it.

Noisy

Fixed by
these parts

Show All

Freezer section too warm

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Wouldn't cool

18 of 25 people found this instruction helpful.

Clarence from Great Cacapon, WV
Really Easy
15 - 30 mins
Socket set

I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now

Was this helpful?

Noisy Fan Motor - Bearing went out.

11 of 14 people found this instruction helpful.

Robert from Carpinteria, CA
Easy
1- 2 hours
Nutdriver

Moving the frig out and cleaning was the hardest part of this job - lots of dust collected over the 17 years the frig was in place. Once all the cleaning was done, with the frig out and back cover off (10 -12 screws taken off with nutdriver),I plugged the frig in and observed the the problem was a noisy fan motor. The motor is at the very ... Read more

Read less

Was this helpful?

Refridgerator was running constantly and condesor would get very hot, condesor fan would only turn on if I spun it.

8 of 9 people found this instruction helpful.

Raymond from Los Lunas, NM
Easy
15 - 30 mins
Nutdriver, Socket set

Unplugged fridge removed the three screws that held fan on to fan frame unplugged condensor fan removed brackets from old fan and put them on new fan installed new fan plugged in fridge and now it works great!

Was this helpful?