TAWS850PQ2 Estate Washer Parts & Repair Help | PartSelect
Models > TAWS850PQ2

TAWS850PQ2 Estate Washer - Overview

Manuals & Care Guides for TAWS850PQ2

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(203)
PartSelect #:PS388034
Manufacturer #:80040
Agitator directional cogs, otherwise known as dog ears, come in a package of four and are generally found in washers where the motor is connected directly to the washer. The agitat...
$2.92
In Stock
(103)
PartSelect #:PS1485646
Manufacturer #:285753A
This direct drive motor coupling, also known as a coupling kit, is a newer version of the part and is used in your washer. The part includes 1 rubber coupling, 2 drive lugs, and ha...
$16.03
In Stock
(68)
PartSelect #:PS11741239
Manufacturer #:WP3363394
This direct drive water pump, also known as the washing machine drain pump or washer drain pump, is manufactured for washing machines that do not have belts. This is a genuine Whir...
$38.64
In Stock
(24)
PartSelect #:PS11743345
Manufacturer #:WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost i...
$3.95
In Stock
(75)
PartSelect #:PS334646
Manufacturer #:285805
The water inlet valve on your washing machine is used to fill the tub with cold, warm, or hot water for the wash and rinse cycles. This part could have either a blue or green-color...
$28.12
In Stock
(45)
PartSelect #:PS334641
Manufacturer #:285785
A clutch assembly is responsible for spinning the basket during the spin cycle in your washing machine. A worn-down clutch can lead to a slower spin which can lead to the machine n...
$31.89
In Stock
(39)
PartSelect #:PS334648
Manufacturer #:285809
This kit included the cam, 4 dogs and bearing.
$10.97
In Stock
(8)
PartSelect #:PS11741866
Manufacturer #:WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
$6.08
In Stock
(10)
PartSelect #:PS11748108
Manufacturer #:WPW10072840
This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appl...
$6.84
In Stock
(43)
PartSelect #:PS11745957
Manufacturer #:WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire....
$27.00
In Stock
Questions and Answers for TAWS850PQ2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No movement from Basket & agitator

  • Customer: Jeff from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 1006 of 1067 people found this instruction helpful
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor co... read more

Replace Water Pump Coupling

  • Customer: RICHARD from PHILA, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 814 of 873 people found this instruction helpful
Removed casing tip over washer disconnected water pump. Disconnected motor then replace coupling then reassemble motor then replaced water pump. read more

washer wouldn't agitate

  • Customer: mike from Kent, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 806 of 852 people found this instruction helpful
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing usin... read more