EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides
  1. Home
  2. SWFT71WN
  3. Symptoms
  4. Noisy

Parts That Fix Speed Queen Washer SWFT71WN Noisy

Noisy is a commonly reported symptom for the SWFT71WN Speed Queen Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your SWFT71WN Speed Queen Washer that will fix Noisy. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Read less
Noisy is a commonly reported symptom for the SWFT71WN Speed Queen Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your SWFT71WN Speed Queen Washer that will fix Noisy. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
1 Thrust

Fixes Symptom 62% of time

Thrust - Part Number: WPW10121334

$ 7.47
In Stock
Part #WPW10121334

Customer Repair Stories

Clanging of dryer when rolling
1 of 2 people found this instruction helpful.
  • John from Bel Air, MD
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Followed video on PartsSelect website, they made it real easy.
Was this helpful?
Thank you for voting!
belt was cracking and dryer was somewhat noisy
4 of 7 people found this instruction helpful.
  • Melody from Silverton, CO
  • Easy
  • More than 2 hours
  • Nutdriver, Screw drivers
I used your great video for pointers as to what to do. I took off the front, raised the top, vacuumed the whole thing up, that took quite a while. Took out the drum. Did more cleaning. Then took off the old retaining rings with retaining ring pliers, took off the old drum rollers and support. Replaced with new roller supports, washer, rol ler, washer and retaining rings. Then I replaced the belt. Tested it and turned the wrong way and it came off. Replaced and tested it again and I don't know why but it came off. Replaced the belt again, tested fine. Then I replaced the felt pads and glides, they were worn. I ended up asking my husband to help hold the drum so I could get the front back on. Replaced front and door. Tried the dryer. Works great AND very, very little noise. Note: when taking the wiring off the light and the door switch, I took photo's of those places with my cell phone and had them to look at to make sure the wiring was correct.
Read less
Was this helpful?
Thank you for voting!
2 Retaining Ring

Fixes Symptom 38% of time

Retaining Ring - Part Number: WP23748

The metal retaining ring, which is under an inch long, holds the rear wheels on the axels of the dryer. The main reason why it would need to replaced is if the retaining ring has sprung out of place or is damaged. Some the symptoms could be that your dryer does not tumble, it makes a loud buzzing noise, or if it pumps, but will not spin. The tools needed for this project are a putty knife, 5/16 nut driver, and snap ring pliers. Refer to the installation video and diagram for further instructions and guidance. Customers ranked this replacement project as easy.

$ 12.85
In Stock
Part #WP23748

Replacing your Amana Dryer Retaining Ring

Replacing your Retaining Ring