SV601-3241 Kohler Engine - Overview

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This is a genuine manufacturer-approved replacement cover which is specially designed for use with Kohler engines commonly installed on Toro lawn and garden equipment. The purpose of this cover is to secure the air filter element and protect internal parts like carburetor from dirt and other debris. It is made of high-quality plastic and ...Read moreit is sold individually, two knobs are included that are used to secure the cover.

This replacement air cleaner element is manufactured for use with Kohler engines installed on lawn and garden equipment. It is a genuine part that is used to filter out dust and debris from entering carburetor and the engine. It is made out of plastic with paper pleated filter and it is sold individually. Replacing this item is a simple ...Read moretask that will not require any tools. • Remove the cover • Replace the filter element • Reattach the cover

This is an identical replacement for a damaged or a missing square key that was installed on a new unit. It is commonly utilized to secure components on a shaft. Keep in mind this high-quality part is made of durable metal and is sold individually. This authentic square pin is supplied by the original equipment manufacturer for use with K...Read moreohler engines that are commonly installed on a variety of lawn and garden equipment. Pliers might be needed to secure or remove it.

This valve push rod is a genuine OEM Kohler replacement used inside small gasoline engines to transmit motion from the camshaft to the valve, allowing proper valve opening and closing during operation. Designed with a durable flanged tip for reliable performance, it is an ideal replacement when worn or damaged push rods cause valve noise, poor compression, or reduced engine performance.

This item is an authentic OEM sourced part that is intended to be used with lawnmower engines from Kohler and Toro. The gasket is used to seal the connection between the cover plate and the crankcase assembly. This item is sold as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. It is a high-quality replacement for a missing or damaged A/C base that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your...Read more model for the correct location and application of this component. Keep in mind this durable plastic base is sold individually.

This is an OEM part sourced directly from the manufacturer. The breather hose kit is commonly found in lawn tractors and engines from Toro and Kohler. This item includes two hoses made of high-quality plastic, which are used to allow air to flow through the cylinder assembly. You may require a wrench when replacing this item.

Rocker Pivot Assembly