SV600S-0010 Kohler Engine - Overview

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This is a genuine manufacturer-approved replacement cover which is specially designed for use with Kohler engines commonly installed on Toro lawn and garden equipment. The purpose of this cover is to secure the air filter element and protect internal parts like carburetor from dirt and other debris. It is made of high-quality plastic and ...Read moreit is sold individually, two knobs are included that are used to secure the cover.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

This replacement air cleaner element is manufactured for use with Kohler engines installed on lawn and garden equipment. It is a genuine part that is used to filter out dust and debris from entering carburetor and the engine. It is made out of plastic with paper pleated filter and it is sold individually. Replacing this item is a simple ...Read moretask that will not require any tools. • Remove the cover • Replace the filter element • Reattach the cover

This valve push rod is a genuine OEM Kohler replacement used inside small gasoline engines to transmit motion from the camshaft to the valve, allowing proper valve opening and closing during operation. Designed with a durable flanged tip for reliable performance, it is an ideal replacement when worn or damaged push rods cause valve noise, poor compression, or reduced engine performance.

This item is an authentic OEM sourced part that is intended to be used with lawnmower engines from Kohler and Toro. The gasket is used to seal the connection between the cover plate and the crankcase assembly. This item is sold as an individual replacement part.