SV591-3212 Kohler Engine - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This replacement push rod is specially designed for Kohler engines commonly installed on a variety of lawn and garden equipment. It is an authentic high-quality item that is sourced from the original equipment manufacturer. The rod is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not...Read more only affect your engine\\\'s performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. It is made of durable metal and is sold individually. You will need a screwdriver and a wrench set to take the engine apart in order to perform this repair.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

It is a genuine Kohler item that is supplied by the original equipment manufacturer for use with engines that are commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. To ensure the proper repair procedure, refer to the appropriat...Read moree diagrams for your model. Keep in mind this high-quality part is made of durable metal and is sold as an individual item. A wrench set will be needed to replace it.

The breather hose acts as a valve for the fuel tank, it allows for the air to enter the fuel tank but it won't allow fuel or fuel emissions to leave the tank. It is an identical replacement for a worn, damaged or a missing component that was installed on a new unit. This is a genuine OEM sourced replacement part which is designed for use ...Read morewith Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is made of high-quality rubber material and is sold individually. Check the diagrams for your model to ensure the correct repair procedure.

This is a genuine Kohler replacement part that has been OEM sourced and is intended to be used with small engines. The gasket is used to seal the connection between the breather valve and the cylinder head. This item may require a socket ratchet to install and is sold individually.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

The breather filter connects to the breather gasket. It is a genuine OEM sourced part which is specially designed for use with Kohler engines. This filter is available as an individual replacement part. A wrench may be needed during the installation of this filter.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This is an authentic Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The metal wing nut is used to secure the air cleaner assembly within the cover. This item is available as an individual replacement part.

This is a genuine OEM replacement part that is sourced directly from the original manufacturer for use on a Kohler engine. This part is used to the hold air filter cover in place. This part includes the seal along with the knob. The knob is made of plastic and the seal is made of rubber.