SV541-3200 Kohler Engine - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This authentic replacement part is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this part is made of high-quality metal and is sold individually.

This is a genuine Kohler replacement part that has been OEM sourced and is intended to be used with small engines. The gasket is used to seal the connection between the breather valve and the cylinder head. This item may require a socket ratchet to install and is sold individually.

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This primary air filter element in your lawn equipment filters the air that enters the engine for combustion. It is a cylindrical-shaped filter made of pleated paper and is typically located within the air cleaner housing secured by an end cap. The filter element has an inner safety element that provides an extra layer of protection. It m...Read moreeasures 10 1/2 inches in length with an outer diameter of 4 1/8 inches and an inner diameter of 2 1/2 inches. To determine if the filter element needs to be replaced check for visible signs of damage or excessive dirt buildup. A damaged or clogged element restricts airflow and allows dirt and debris to enter the engine resulting in reduced performance. To replace the filter element unhook the retaining clips and detach the end caps of your air cleaner housing from the machine. Remove the old element from the housing and insert the new one. Refer to your user manual for any specific installation instructions. Please note that this OEM-sourced filter element is sold individually and separately from the safety air filter element.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This is a genuine manufacturer-approved replacement cover which is specially designed for use with Kohler engines commonly installed on Toro lawn and garden equipment. The purpose of this cover is to secure the air filter element and protect internal parts like carburetor from dirt and other debris. It is made of high-quality plastic and ...Read moreit is sold individually, two knobs are included that are used to secure the cover.