STE105PLUS (10500420) Metabo Jig Saw - Overview

This is a genuine manufacturer-supplied replacement which is specially designed for use with Metabo power tools. The purpose of a brush is to conduct the crurrent in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind t...Read morehis high-quality brush is sold in a pack of two. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem. Please refer to the appropriate diagrams and the owners manual for the exact location and installation of these components. Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch?

This replacement slider switch knob is a genuine metabo part. It is supplied directly from manufacturer for use with grinders/polishers. It is the slider knob for the main on/off switch of a tool. This slider is made out of black plastic and it is sold individually. Replacing this switch slider should only require a screwdriver. • Ma...Read moreke sure the tool is unplugged • Remove the housing screws • Remove the slider and secure the new one in place • Reassemble and test the unit

This high quality replacement switch is used on Metabo power tools. It is an authentic OEM sourced item, not an aftermarket imitation. It is the mechanical switch that allows user to turn the tool on and off. Since switches have moving plastic parts, they will eventually wear out and fail requiring a replacement. Please note, one switch i...Read mores included per order. To complete this repair you will need a screwdriver. • Remove the housing • Disconnect wires from the old switch • Remove the old switch • Secure the new switch in place • Connect wires to it • Reassemble and test the tool

This authentic manufacturer-supplied part is designed for Metabo power tools. Bushings are commonly used to provide a tight fit between connected components. It is made of high-quality rubber material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwd...Read moreriver and a wrench set to take apart and reassemble the housing when performing this repair.