ST2106 (2012-11) Jonsered Leaf Blower / Vacuum - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

It is a high-quality item that is supplied directly from original equipment manufacturer for use with lawn and garden equipment. This specially designed rivet has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. It is made of durable metal and it is sold individually.

This replacement scraper bar is an authentic item that is supplied directly from original equipment manufacturer for use with Husqvarna and Poulan snowblowers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear th...Read moree sidewalk, leaving patches of snow behind. Please note this scraper bar is sold individually.

It is a genuine OEM sourced replacement screw which is specially designed for use with Husqvarna, Poulan and Ryobi riding lawn mowers and garden tractors. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of ...Read morethis item. It is a high-quality hex head screw which is made of durable metal and it is sold individually.

This traction belt is supplied directly from the original equipment manufacturer. The belt is fitted onto the pulleys, transmitting force to related components. This rubber composite item is sold individually. A screwdriver and a wrench are necessary for the replacement. It is recommended to purchase a spare as belts can wear out over time and regular use.

Maintain proper drive performance with this traction idler spring, designed to keep consistent tension on the drive belt for smooth and reliable operation. Built from durable metal, it helps ensure proper engagement of the ground drive system while reducing the risk of belt slipping during use. Engineered for dependable performance, this ...Read morecomponent supports efficient power transfer and helps keep your equipment operating smoothly in demanding conditions.

The bearing flange attaches to the choke return spring. It is made of metal and is sold individually. This is an OEM part sourced directly from the manufacturer and used in carburetors, snowblowers, and lawn tractors made by Weed Eater, Walbro, Husqvarna, Poulan, and Jonsered. A set of pliers might be necessary during the installation of this part. This item will need to be replaced if it breaks.