ST2106 (2011-05) Jonsered Leaf Blower / Vacuum - Overview

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

This replacement scraper bar is an authentic item that is supplied directly from original equipment manufacturer for use with Husqvarna and Poulan snowblowers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear th...Read moree sidewalk, leaving patches of snow behind. Please note this scraper bar is sold individually.

This manufacturer certified 1/4 Hex Nut can be installed using a wrench or socket and is used to secure parts in place and spead the load. If the part being secured seems loose, check this nut and replace it if broken or missing. Refer to your make, model and diagrams to ensure this is the right part for you.

This manufacturer-approved replacement part is specially designed for Husqvarna and Jonsered snowblowers. The skid plate allows a user to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. These plates absorb a lot of friction while the machine is in operation, and they are designed to wear down over time...Read more. Keep in mind this high-quality skid plate is made of durable material and is sold individually. Note, the hardware to secure it is sold separately. A wrench set will be needed to perform this repair.

This retainer spring, also known as a retainer clip, is an authentic manufacturer replacement part for a variety of lawn and outdoor power equipment. It is responsible for securing the equipment parts and preventing them from dislodging or becoming loose during operation. If the retainer spring is rusted, unable to maintain tension, or is...Read more improperly installed, it will cause the equipment parts to become unstable, and noisy, and lead to eventual equipment failure. Carefully remove the spring from its position by releasing the tension on it. Place the new spring in position, and if needed, reapply tension to the spring to ensure it is securely attached to the component parts.

This 5/16-18 carriage bolt is 3/4 inch long. Its square neck fits into a square hole and helps stop the bolt from turning while the nut is tightened. It is used on select lawn and garden machines as well as snowblowers. Check the parts diagram for its exact location and tighten it to the setting listed in the manual.

This OEM auger control spring in your snow thrower connects the traction control rod and the auger control assembly. It regulates the engagement and disengagement of the auger for effective snow throwing. If the spring is broken or stretched, the auger will not engage properly and may feel loose. Abnormal noises or vibrations may also occ...Read moreur. If not replaced, the auger may become unpredictable or difficult to control. To replace the auger control spring, use pliers to release it from its attachment points. It is commonly located at the end of the control rod, attached to a sleeve. This replacement spring is sold individually.

This is a genuine OEM sourced component which is specially made for use with Husqvarna and Poulan lawn and garden equipment. The washer helps to ensure a tight fit between connected parts, unfortunately, over time the material will wear out and it may begin to crack eventually requiring a replacement. This high-quality part provides an id...Read moreentical replacement for a missing or a faulty friction washer that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this part is made of durable nylon and is sold individually.

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of thi...Read mores nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.

This plastic bearing retainer is an OEM part direct from Husqvarna. Compatible with many snowblower machines, this component secures the ball bearing. For the repair, you will need a wrench and pliers. The bearing retainer is sold individually.