ST2106-96191002008 (2012-06) Jonsered Leaf Blower / Vacuum - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

Maintain proper drive performance with this traction idler spring, designed to keep consistent tension on the drive belt for smooth and reliable operation. Built from durable metal, it helps ensure proper engagement of the ground drive system while reducing the risk of belt slipping during use. Engineered for dependable performance, this ...Read morecomponent supports efficient power transfer and helps keep your equipment operating smoothly in demanding conditions.

The bearing flange attaches to the choke return spring. It is made of metal and is sold individually. This is an OEM part sourced directly from the manufacturer and used in carburetors, snowblowers, and lawn tractors made by Weed Eater, Walbro, Husqvarna, Poulan, and Jonsered. A set of pliers might be necessary during the installation of this part. This item will need to be replaced if it breaks.

This is a genuine OEM part from Husqvarna. The brake spring is compatible with many snowblower machines. This metal spring is hooked from the frame assembly to the idler pulley, providing tension to the snowblower brake. The brake spring is sold individually. For the repair, you will need a screwdriver, adjustable wrench and a pair of pliers.

The flange bearing goes between the pulley flange impeller and the impeller assembly. This part is an OEM from Husqvarna, Poulan, and Jonsered for snowblowers. It is made of metal and will need to be replaced if it breaks. This high-quality part is priced individually and may require a socket set during installation.

This manufacturer certified 1/4 Hex Nut can be installed using a wrench or socket and is used to secure parts in place and spead the load. If the part being secured seems loose, check this nut and replace it if broken or missing. Refer to your make, model and diagrams to ensure this is the right part for you.

The rubber wheel ring attaches to the wheel hub. This part is an OEM from Husqvarna, Poulan, and Jonsered for use in snowblowers. It is sold individually. A socket set and a wrench set might be required during the replacement of this part. It may become broken and will need to be replaced.

This retainer spring, also known as a retainer clip, is an authentic manufacturer replacement part for a variety of lawn and outdoor power equipment. It is responsible for securing the equipment parts and preventing them from dislodging or becoming loose during operation. If the retainer spring is rusted, unable to maintain tension, or is...Read more improperly installed, it will cause the equipment parts to become unstable, and noisy, and lead to eventual equipment failure. Carefully remove the spring from its position by releasing the tension on it. Place the new spring in position, and if needed, reapply tension to the spring to ensure it is securely attached to the component parts.