ST2106-96191002005 (2009-08) Jonsered Leaf Blower / Vacuum - Overview

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the right skid plate is sold separately. It is advised to replace both skid ...Read moreplates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

This shear bolt secures the snowblower auger to the drive shaft while acting as a built-in safety feature. Designed to break under excessive force, it helps protect the gearbox and engine from damage if the auger hits a hard object. Replacing a broken or missing bolt restores proper auger operation and ensures reliable, safe performance.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the left skid plate is sold separately. It is advised to replace both skid p...Read morelates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

This traction belt is supplied directly from the original equipment manufacturer. The belt is fitted onto the pulleys, transmitting force to related components. This rubber composite item is sold individually. A screwdriver and a wrench are necessary for the replacement. It is recommended to purchase a spare as belts can wear out over time and regular use.

This is one of the drive belts for the unit, please make sure to check appropriate diagrams for correct location and use of this item. It is an authentic high quality item that is sourced from original equipment manufacturer for use on Poulan and Husqvarna snowblowers. Overt time belts tend to wear out and stretch, inspect belts periodica...Read morelly and replace them as needed to maintain peak performance. One durable rubber belt is included per order.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

The rubber wheel ring attaches to the wheel hub. This part is an OEM from Husqvarna, Poulan, and Jonsered for use in snowblowers. It is sold individually. A socket set and a wrench set might be required during the replacement of this part. It may become broken and will need to be replaced.

This retainer spring, also known as a retainer clip, is an authentic manufacturer replacement part for a variety of lawn and outdoor power equipment. It is responsible for securing the equipment parts and preventing them from dislodging or becoming loose during operation. If the retainer spring is rusted, unable to maintain tension, or is...Read more improperly installed, it will cause the equipment parts to become unstable, and noisy, and lead to eventual equipment failure. Carefully remove the spring from its position by releasing the tension on it. Place the new spring in position, and if needed, reapply tension to the spring to ensure it is securely attached to the component parts.

This is an original replacement part manufactured for use with snowblowers. The special handle knob is used to secure the handles and to adjust the position of the handles. This handle knob is available as an individual replacement part, please note two are required.

This 5/16-18 carriage bolt is 3/4 inch long. Its square neck fits into a square hole and helps stop the bolt from turning while the nut is tightened. It is used on select lawn and garden machines as well as snowblowers. Check the parts diagram for its exact location and tighten it to the setting listed in the manual.