ST15G3 Frigidaire Freezer - Overview

Diagrams for ST15G3

See every part. Know exactly what you need.

Parts for the ST15G3

$24.67

White Touch up Paint

★★★★★

(1)

Part #5303321319

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read more

Read less

$70.78

Run Capacitor

★★★★★

(3)

Part #218909912

This refrigerator run capacitor is a 220-volt, 12-microfarad component designed to support the compressor motor by providing continuous current to its windings. By regulating electrical flow, it helps the appliance maintain proper cooling performance and prevents issues such as excessive run time or temperature fluctuations. If your refri...Read more

Read less

Interior Drain Plug

Part #216502600

This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read more

Read less

$39.82

Filter - Drier

Part #5303305677

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the ref...Read more

Read less

Drain Plug

★★★★★

(2)

Part #297013600

This OEM drain plug in your freezer is a small white circular part located at the bottom. Its purpose is to seal the front hole of the cabinet, which is used to drain water during defrosting. If you notice water leaking or pooling at the bottom, your drain plug may be deformed or broken. Failure to replace the broken plug can result in wa...Read more

Read less

$455.66

Compressor

★★★★★

(2)

Part #5304475102

This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repair. It requires special tools and knowledge to do so.

$23.01

Compressor Mounting Grommet

Part #216498900

$48.35

Thermostat Knob - White

Part #216707200

$102.60

Temperature Control Thermostat

★★★★★

(1)

Part #216714601

This part helps maintain a constant temperature within the appliance.

SUPPORT

Part #216997400

$22.97

SCREW

Part #216629601

Lock & Key

Part #216621200

Common Symptoms of the ST15G3

How this model fails, and the parts that fix it.

Freezer section too warm

Fixed by
these parts

Show All

Fridge and Freezer are too warm

Fixed by
these parts

Show All

Videos related to the ST15G3

Watch our pros, then fix it yourself.

Replacing the Run Capacitor

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Freezer wouln't start

7 of 11 people found this instruction helpful.

Ivette from Grand Island, NY
Really Easy
Less than 15 mins
Screw drivers

First I removed the clamp, pulled out the part, and diconnected the two wires on the side and a small screw. Reconnected the new part with the small screw, connected the wires and plugged the part back to the side of the motor. Whaa La, Done.

Was this helpful?

While defrosting freezer tossed the drain plug with ice and water into the sewer system.

4 of 5 people found this instruction helpful.

paul from LISLE, IL
Very Easy
Less than 15 mins

Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.

Was this helpful?

Freeze would not re-start after temp rose above 23 degrees.

2 of 2 people found this instruction helpful.

Andy from GOOSE CREEK, SC
Really Easy
15 - 30 mins
Screw drivers

Unplugged the freezer. Located the Run Capacitor (next to the compressor). Removed the wire holding bracket, removed the Run Capacitor from the Start Relay. Installed the NEW Capacitor, re-installed the holding bracket. Plugged the unit in, looking at the display for the proper start-up sequence data. All is good - freezer operating for a ... Read more

Read less

Was this helpful?