SS810 Waring Blender - Overview

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these se...Read moreals and washers will become brittle and compressed, then will have to be replaced. For proper application please refer to diagrams of your unit. This part is made out of rubber material and it is sold individually. To complete this repair you will need a wrench.

Genuine Waring replacement part, this item is sold individually. This part acts as a seal for the blenders shown below. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced.

It is a genuine OEM supplied replacement hardware that is specially produced for Waring blenders. This is the hex nut that is secured on the bottom of the blender jar. Please note one durable metal item is included per order.

This is a genuine manufacturer-sourced part which is specially designed for Waring blenders. The coupling spins on the motor shaft to rotate the blades. This part is made of metal and is sold individually. To install you will need a wrench and screw driver. Just unscrew the drive coupling from the bottom of the blade assembly and screw the replacement on the same way.

This authentic item is supplied by the original equipment manufacturer for Waring blenders. The washer helps to provide a tight seal between connected components, unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. It is an identical replacement for a missing or a faulty bushing that was installe...Read mored on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable material and is sold individually.

It is a genuine replacement part that is supplied directly from the original equipment manufacturer for use with Waring blenders. This is the special blade assembly which sits in the main container to chop the food. It is a high-quality component which is made of durable stainless steel and it is sold individually, please note the washers and other components are all sold separately.

This is a genuine item that is supplied directly from the original manufacturer for use with Waring blenders. It is an identical replacement for a damaged or missing blending blade assembly. This high-quality component is made of durable stainless steel and is sold individually, please note the seal is sold separately.

This is an original Waring Pro part. This Washer is used on many models of Waring blenders. The Washer is used as a spacer under the Drive Coupling and fits on the shaft of the motor. The washer needs to be replaced if it becomes lost or damaged in any way. The Washer is made of metal and is about a quarter inch in diameter. Tools used: • Screwdriver • Wrench

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. For proper application please refer to diagrams of your unit. This part is made out of metal and it is sold individually.