SS470 (2014) Cub Cadet Trimmer - Overview

This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.

This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.

This air filter is an original sourced directly from Craftsman. The filters purpose is to keep dirt, dust and other contaminants from entering the carburetor and engine. You can clean this foam filter by putting it in a clean plastic bag with a little oil and rub the oil into the filter, then remove the filter and squeeze it in a paper towel to remove the excess oil. This is an individually sold part.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

Enjoy trimmer performance at its peak with this Gearbox for Craftsman line trimmers. Part of maintaining a perfectly manicured lawn or garden, this essential component hosts the gears that drive the spool for precision cutting. do not let a malfunctioning gearbox hinder your landscaping work, get your trimmer back up to speed with this qu...Read moreality Craftsman replacement. Despite its heavy-duty task, replacing it is simple but always take caution. For your safety, we suggest wearing work gloves during installation. Trust in Craftsman's commitment to providing reliable, high-quality parts for your outdoor power equipment.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-rin...Read moreg, use care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with handheld trimmers/edgers. This spring helps the throttle trigger to retract. It is made out of metal and it is sold individually. Replacing this item you would need a screwdriver and pliers.

This is an authentic Troy-Bilt replacement item, not an aftermarket imitation. It is specially designed for use with gas powered trimmers. This aircleaner assembly includes a plastic base, cover and the foam filter element. The purpose of this item is to filter out the dust and debris from the air that goes into the engine. To complete t...Read morehis repair you will need a screwdriver. • Remove the filter cover • Take out the element • Remove the air filter mounting screws • Secure the new assembly in place and test the unit

This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It is utilized to create an air-tight seal between the carburetor and the insulator. Over time seals tend to become brittle and compressed eventually requiring replacement. This part is made from durable composite material and it is sold individually.

This is a genuine OEM replacement part used with MTD lawn and garden trimmers. The screw & nuts (10 x 32) are used to fasten the shield assembly onto the lower boom assembly. This part is sold individually. A Phillips screwdriver and pliers are required for the proper installation.

The metal screw attaches to the gear box housing assembly. This is a genuine Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet replacement part for use in tillers and trimmers. This item is available as an individual replacement part even though several may be needed. A torx screwdriver will be needed during the replacement of this part. It will require replacing if it becomes stripped or broken.