My Orders
SP105 Snapper Lawn Mower - Overview
Models starting with SP105
Click on the best match to narrow your results.
- SP105 (7800956-00) Snapper Lawn Mower (775 Series 21-In. Self Propelled Electric Start Walk Behind Mower)
- SP105 (7800961-00) Snapper Lawn Mower (775 Series 21-In. Self Propelled Electric Start Walk Behind Mower)
- SP105 ( 12ABP2B7707 2020 ) Snapper Lawn Mower (21 Inch Walk-Behind Mower, 775 Series Briggs)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$34.74
In Stock
Mulching Blade
Part #942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an angled design that promotes optimal airflow, allowing grass clippings to circulate through the cutting deck for effective side discharge and m...Read moreulching. Over time, mower blades can dull or wear down, leading to torn grass blades and a less polished lawn appearance. Replacing a worn blade with this high-quality part ensures a sharper, cleaner cut that keeps your lawn looking its best. This blade is sold individually.
Read less
$16.86
On Order
Lawn Mower Trail Shield
Part #731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without its securing hardware, and measures 16.5-inches long and 4.5-inches wide. It features a notch on both sides to secure it to the rear of the...Read more mower chassis and prevent glass clippings, dirt and other debris from hitting the user. This shield is made of durable plastic, meaning over time it can crack, and when your current trail shield is broken or damaged, it is crucial that you replace it. To replace it, remove the bag from your mower and simply lift out the old shield and install the new one.
Read less
$6.40
In Stock
Bell Blade Support
Part #736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.
Read less
$6.47
In Stock
Screw
Part #710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.
$7.04
In Stock
$6.40
In Stock
Nut-flglk
Part #712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locatio...Read morens. Refer to your owners manual to determine if this is the correct part.
This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
Part #710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.
$8.19
In Stock
Lawn Mower Nut
Part #703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Read less
$8.76
In Stock
Screw-carriage 5/1
Part #710-04998
This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct repair procedure. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restra...Read moreins the screw and keeps it from turning when the nut is tightened. This screw is made of high-quality metal and is sold individually. A wrench might be needed to replace this hardware.
Read less
$10.88
In Stock
Snow Blower Star Knob
Part #720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually.
Th...Read moreis part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation.
Customers rate this repair as Easy.
Read less
$39.21
In Stock
Traction Control Cable
Part #946-05121A
Keep your lawn mower running smoothly with this efficient Craftsman Drive Control Cable. This essential component engages the gear case enabling your machine to move with ease. Designed to offer a precision fit this high-quality speed-rwd cable ensures enhanced performance and longevity. Although installation is straightforward it's recom...Read moremended to wear work gloves during the process for hand safety. Experience the reliable operation this exceptional Craftsman accessory delivers for a well-maintained and efficiently functioning lawn mower.
Read less
$39.21
In Stock
Traction Control Cable
Part #946-05121A
Keep your lawn mower running smoothly with this efficient Craftsman Drive Control Cable. This essential component engages the gear case enabling your machine to move with ease. Designed to offer a precision fit this high-quality speed-rwd cable ensures enhanced performance and longevity. Although installation is straightforward it's recom...Read moremended to wear work gloves during the process for hand safety. Experience the reliable operation this exceptional Craftsman accessory delivers for a well-maintained and efficiently functioning lawn mower.
Read less
$26.53
In Stock
Side Discharge Chute
Part #731-07486
Common Symptoms of models starting with SP105
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
2 of 4 people
found this instruction helpful.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!