SN902XP Senco Nailer - Parts

This is a genuine Senco replacement part, it is sold individually. Its purpose is to retain or secure the Retaining Pins in the Senco models below. It is attached to the pins by pressing them on the beveled end of the pins.

This is an authentic replacement part that is supplied directly from the original equipment manufacturer for use with Senco nailers. It is the special component which helps to provide an air-tight seal for the valve assembly, over time it may wear out and begin to crack eventually requiring a replacement. Please note this durable rubber seal is sold individually.

This replacement gasket is a high quality item that is specially manufactured for Senco nailers and pinners. It helps to provide and air tight seal between the cap-deflector and the main body. Please note this composite material gasket is sold individually, replacing it you will need a hex key also known as an allen wrench.

This is an authentic manufacturer-sourced replacement part, it is designed for use with Senco nailers. It is one of the special seals for the cylinder, over time it may begin to wear out and crack eventually requiring a replacement. It is made of high-quality rubber material and it is sold individually.

This is a genuine manufacturer-sourced part which is specially made for use with Senco nailers. It is an identical replacement for a missing or a damaged retainer that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable material and is sold individually.

This bumper is supplied directly from the original equipment manufacturer. Compatible with several nailer devices, the plastic bumper is sold individually. Fitted between the spring and the seal, this component provides protection from friction. An Allen wrench and pliers are most often used to make the repair.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Senco nailers and pinners. The purpose of this bumper is to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep i...Read moren mind this high-quality item is made of durable material and is sold individually.

This pin is made OEM to fit the Senco tools listed below. It is used to secure trigger and safety element/guide to a nailer's main body. It is held in place by o-ring retainer # KC0062. This small pin is essential to the operation of these tools but is easily lost or broken; having a backup is a good idea. Sold individually.

This pressure plate, also referred to as a sleeve adapter assembly, is a critical component within the pneumatic system of an air nailer that helps maintain a proper airtight seal around the cylinder sleeve for consistent performance and reliable fastener driving power. By supporting the head valve and internal air delivery system, it hel...Read moreps ensure efficient pressure transfer while reducing the risk of air leaks that can lead to poor driver return, reduced fastening power, or inconsistent operation. Replacing a worn, cracked, or damaged pressure plate can help restore proper tool performance and air system integrity. Installation typically involves disassembling the upper cylinder assembly, removing the existing pressure plate, and fitting the replacement component in its original position before reassembling the tool. For best results, inspect related seals, O-rings, gaskets, and cylinder components for wear and replace any damaged parts during servicing to help ensure a complete repair and long-lasting performance.

This replacement seal O-ring helps maintain an airtight seal within pneumatic nailers and staplers, ensuring consistent air pressure and reliable tool performance. Manufactured from durable rubber, it is designed to prevent air leaks within the tool's internal air system, helping restore proper driving power and operating efficiency when ...Read morethe original O-ring becomes worn, cracked, flattened, or damaged. Common symptoms of a failed seal include reduced fastening power, air leakage from the tool body, and inconsistent operation. Installation typically involves disassembling the affected portion of the tool, removing the worn O-ring, lightly lubricating the new seal with pneumatic tool oil, and installing it in the original groove before reassembly. Weighing approximately 0.01 lbs, this small but essential maintenance component helps extend tool life and maintain dependable performance. For best results, inspect related O-rings, seals, and cylinder components during servicing and replace any worn parts as needed to ensure a complete and long-lasting repair.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Senco nailers and pinners. This is an identical replacement for a missing or damaged end cap of the unit, please refer to the appropriate diagrams of your model for the correct location and application of this component. It is a high-quality part which is made of durable plastic and is sold individually.

This is an authentic Senco replacement part that has been sourced from the original manufacturer to be used with pneumatic fasteners. The ring is used to provide spacing and to support the space at the top of the cylinder assembly. This ring is available as an individual replacement part.