SN-1000FD Shimano Spinning Reels - Overview

This authentic manufacturer-supplied washer is specially made for use with Shimano fishing reels. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a worn washer that was installed on a new unit. One durable metal part is included. Refer to the appro...Read morepriate diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this hardware.

This part is made of metal and is available individually. The spool support attaches to the main shaft. A screwdriver may be helpful when replacing this item. It will need to be replaced if it becomes broken. This is an OEM Shimano part directly sourced from the manufacturer for use reels.

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This is an authentic Shimano replacement part manufactured for use with spinning reels. The special screw is compatible with several models of reels and is commonly use to secure the rear protector to the body of the reel. This screw is available as an individual replacement part, please see model diagram for associative parts.

This item is available as an individual replacement part. The screw attaches to the bail trip strike. A screwdriver will be necessary during the installation of this item. It is made of metal and will require replacing if it breaks or strips. This is a genuine Shimano part sourced directly from the manufacturer for use in reels.