My Orders
SHE3AR75UC (07) Bosch Dishwasher - Overview
Diagrams for SHE3AR75UC
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$12.80
In Stock
Upper Rack Roller
Part #10032849
This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It simply clips right on to the rack frame. After the wheel are attached to the side of the dishrack and are placed into the slides on either s...Read moreide of the appliance. Dishrack roller wheels allow the upper rack in a dishwasher to glide in and out of the appliance with ease. Due to the fact the roller wheel is made of plastic they tend to wear out after a period of time, also they can break. We do recommend you replace these rack wheels in pairs as they often wear out at the same rate. These wheels are sold individually.
Read less
$112.85
In Stock
Dishrack Wheel
Part #10040888
This wheel for the lower rack of your dishwasher, it includes the brushing you will need for installation; the axel is not included. You need to line the replacement wheel up with the axel, slide it into place, and then simply clip the wheel onto the frame. There are eight wheels on the lower rack in your dishwasher that help it roll in a...Read morend out of your appliance with ease. This wheel is made of plastic, it is gray in color, and it is sold individually.
Read less
$41.88
In Stock
FILTER-MICRO
Part #00645038
This micro filter is a genuine OEM replacement part that is compatible with dishwashers. Its primary function is to catch and trap small particles of food, debris, and other contaminants that may be present in the water circulating inside the dishwasher during the wash and rinse cycles. This filter helps prevent these particles from clogg...Read moreing the pump or recirculating back onto the dishes. Signs of a faulty micro filter include poor cleaning performance, slow drainage, stagnant water at the bottom of the tub, and loud and unusual noises when the dishwasher is running. It is recommended to clean the filter once a month for optimal performance.
Read less
$52.36
In Stock
Water Valve
Part #00622058
The dishwasher water inlet valve controls the water flow into your appliance, ensuring proper fill levels for effective cleaning. This genuine OEM replacement part is compatible with select Bosch, Thermador, and Gaggenau models and meets strict quality standards. If the valve is defective, the dishwasher may fail to fill or underfill. To ...Read moreinstall, unplug the dishwasher, shut off the water supply, and wear gloves for safety. Verify compatibility before ordering.
Read less
$6.40
In Stock
HOLDER
Part #00616990
Introducing the Dishrack Tine Row Holder from Bosch, a high-quality, authentic OEM part designed for dishwashers. This particular component is known for its compatibility with various models from the Bosch range, including certain Thermador and Gaggenau models. Primarily, the function of the holder is to attach the tine row securely to th...Read moree dishrack, promoting optimal functionality and overall efficiency. Do remember to put on your work gloves before starting the installation process of this part to ensure your hands are fully protected. It's also worth noting that while some parts may visually resemble this item, there can be subtle variations in size and shape. We advise confirming that this is the correct part for your specific model before purchasing.
Read less
$60.05
In Stock
Drain Pump - 55Hz
Part #00611332
The pump ejects the water from the dishwasher through the drain hose.
$6.40
In Stock
Dishwasher Holder
Part #00616989
This dishwasher tine row retainer is a genuine OEM component designed to secure movable tine rows on the lower rack of select dishwashers. Constructed from durable gray plastic, it enables flexible rack configurations to accommodate various dish sizes and shapes, enhancing both organization and cleaning performance. By anchoring the adjus...Read moretable tines, it helps maintain stability during wash cycles and prevents shifting or damage to dishes. Installation is straightforward and typically involves snapping the retainer into place on the rack. This part is a common replacement for worn or broken retainers and restores full rack functionality.
Read less
$14.72
On Order
Dishrack Stopper Kit
Part #00165254
A holder is used in dishwashers, it is known as the dishrack stop kit. This kit comes with both the front and the rear stop, these parts are installed at either end of the rails that the upper rack slides on. These stops help keep the rack on the rail, without this part the upper rack of your dishwasher will not slide in and out of your d...Read moreishwasher properly. If you need to fix both the left and right rail you will need to order two kits. To install this part, you will need to remove the upper rack from your dishwasher, and you may need a flathead screwdriver. These front and rear rack stops are made of plastic and they are gray in color.
Read less
$12.16
In Stock
Dishwasher Screw
Part #00188670
$32.57
In Stock
HOSE-DRAIN
Part #00668108
This dishwasher drain hose is a genuine OEM replacement designed to connect the drain pump to the household plumbing system, ensuring efficient removal of wastewater during operation. Constructed from high-quality translucent material, it offers durability and resistance to wear, helping prevent leaks and water damage. Engineered to meet ...Read moreoriginal specifications, this hose provides a secure fit for select Bosch, Thermador, and Gaggenau models. Replacing a damaged or clogged hose restores proper drainage and supports the overall performance of the appliance. Installation typically involves disconnecting the existing hose and securing the new one to the pump and drain connection, with compatibility verification recommended prior to purchase.
Read less
No Longer Available
$6.41
In Stock
SCREW
Part #00189670
This part is the replacement screw for your washer. The head is approximately 1/4 inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This part is an authentic OEM part sourced directly from the manufacturer.
Common Symptoms of the SHE3AR75UC
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More