SGM464GG (After SN: MF0000000) Dacor Range - Parts

The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and works to keep it leveled. This way you can place your pans and pots on an even surface. This part also prevents your burner grates from scratc...Read morehing and damaging the top of your stove. This can lead to friction and the paint on the stove top can chip. Make sure to unplug range from power source before installing this part.

This top burner knob is a matte black in color with a logo. This part is sold individually and accepts a D-shaped shaft. The knob measures 2 inches in diameter. The burner knob allows you to determine the temperature of the surface burner on your cooktop. The replacement of the knob is extremely easy and does not require the use of any to...Read moreols. Simply pull the old knob off its post and snap the new knob into place. This is a genuine OEM part that comes straight from the manufacturer.

This knob is used in ranges and ovens. The knob allows you to adjust the heat temperature of the surface burner. This knob accepts a D-shaped shaft. If your knob does not rotate properly or gets stuck, you should replace it. No tools are required for this replacement. This part has a diameter of 2 inches and a length of 1 1/4 inches long ...Read morewith the shaft. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.

This is an authentic OEM replacement part that has been sourced directly from the manufacturer. It was designed for use with various models of Dacor Cooktops and Ranges, to ensure this part is compatible with your device please see the "Model Cross Reference List" below. This part ensures that heat is controlled to the desired level, and ...Read morethat no spills damage the internal components of the appliance. It is made of durable black plastic and has a diameter of approximately 2.5". Each is sold individually.

This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the manufacturer. It includes one igniter, one spring, one C-clip, and heat shrink tubing. These parts are what produces the spark that lights th...Read moree surface burner on your oven, range, or stove. Please note that this kit is for one burner only. It is recommended to check your other burner igniters in case they should be replaced as well. Check your original burner ring for holes, this kit will not be compatible with burner rings that have holes, and you may need a new one.

This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a seal,which will limit the risk of fuel leaks over time. Due to natural wear and tear this part may dry out or crack. If this happens, you will need to replace this part. We also reco