EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

SD19W-L-P7332012WL Amana Refrigerator - Overview

Diagrams for SD19W-L-P7332012WL

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Condenser Fan Motor Kit – Part Number: 833697
$65.73
In Stock
Refrigerator Condenser Fan Motor Kit
★★★★★
★★★★★
(51)
Part #833697
This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling the warm refrigerant before it enters the evaporator. When your fan or fan motor is not working your refrigerator will not cool properly. This is a 2-Watt, 115 Volt motor that rotates the fan in a counter clockwise direction. This kit includes the hardware needed for installation, and a set of instructions. Before you begin any repair work make sure to unplug your appliance.
Defrost Timer Kit - 120V 60Hz – Part Number: R0131577
$54.24
In Stock
Defrost Timer Kit - 120V 60Hz
★★★★★
★★★★★
(4)
Part #R0131577
The timer will shut off the cooling system of the refrigerator and the defrost heater will turn on.
Filter – Part Number: WPB2150504
$81.96
In Stock
Filter
Part #WPB2150504
SWITCH, LIGHT – Part Number: C3680305
No Longer Available
SWITCH, LIGHT
Part #C3680305
Cold Control Thermostat - with an eighteen inch capillary – Part Number: C3615002
No Longer Available
Cold Control Thermostat - with an eighteen inch capillary
Part #C3615002
This cold control thermostat is used for some of Amana/Speed Queen's brands of refrigerators. It has a capillary 18 inches long and allows for a temperature range between 17 degrees Fahrenheit and -7.5 degrees Fahrenheit.
MOTOR-COND – Part Number: R0156788
No Longer Available
MOTOR-COND
Part #R0156788
KIT- DEFRO – Part Number: R0168028
No Longer Available
KIT- DEFRO
Part #R0168028
SUB C3667002 – Part Number: C3667001
No Longer Available
SUB C3667002
Part #C3667001
SWITCH – Part Number: M0341202
No Longer Available
SWITCH
Part #M0341202
DISCONTINUED – Part Number: M0305301
No Longer Available
DISCONTINUED
Part #M0305301
DRIER – Part Number: B521505-1
No Longer Available
DRIER
Part #B521505-1
DISCONTINUED – Part Number: C3628603
No Longer Available
DISCONTINUED
Part #C3628603

Common Symptoms of the SD19W-L-P7332012WL

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sometimes the condenser fan would start causing the refrigerator to overheat.
189 of 228 people found this instruction helpful.
  • Tom from Franklin, WI
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Was this helpful?
Thank you for voting!
Fridge and freezer didn't cool enough
106 of 117 people found this instruction helpful.
  • Peter from Eden, UT
  • Really Easy
  • Less than 15 mins
  • Socket set
I diagnosed the problem via the internet. Diagrams helped a lot. Coils were frozen over. Thawed them out overnight. Manually advanced timer and the defrost heater was operable. The defrost timer wasn't "turning" on it's own. I turned the fridge back on while I awaited the part. It worked fine for the time I had to wait. (over two weeks since I had delayed ordering the part) New timer arrived as promised. Undid 4 hex head (1/4") screws. Unplugged 4 prong connection. Plugged in new timer and replaced the 4 screws. Frigde works great.
Was this helpful?
Thank you for voting!
noisy fan motor
38 of 46 people found this instruction helpful.
  • robert from nashotah, WI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Socket set
rmv panel (5min) rmv fan/motor 3 screws (10 m) cut wire 2in from motor, re route remainder of wire to front so can strip for wire nuts. ( 10m) attach old fan to new motor, place in old opening ,3 screws, a little fussy to align, ( 15m ) route and strip wire from new motor , zip ties work well, wire nuts , plug in fridge vola, no noise, c lose up, reverse panel. ( 20m). i also took time to clean grilles with small vac and damp rag, ( looks and sounds like new) bob Wi.
Was this helpful?
Thank you for voting!