EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

SCBC2001CSS00 General Electric Microwave - Overview

Diagrams for SCBC2001CSS00

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Fuse – Part Number: WB27X10928
$21.81
In Stock
Microwave Fuse
★★★★★
★★★★★
(21)
Part #WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Primary Door Interlock Switch – Part Number: WB24X10047
$54.07
On Order
Primary Door Interlock Switch
★★★★★
★★★★★
(20)
Part #WB24X10047
This interlock switch is located in the door latch.
Monitor Interlock Switch – Part Number: WB24X25397
$39.45
In Stock
Monitor Interlock Switch
★★★★★
★★★★★
(5)
Part #WB24X25397
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms that the door is securely closed before allowing the microwave to operate. A damaged or faulty switch may prevent the unit from starting, even if the door appears latched. Replacing this genuine part restores safe and reliable operation. Installation should be performed with care, and it's recommended to disconnect power before beginning any repair.
Screw – Part Number: WB1X1130
$16.05
In Stock
Screw
★★★★★
★★★★★
(2)
Part #WB1X1130
Sold Individually.
Turntable – Part Number: WB06X10219
No Longer Available
Turntable
★★★★★
★★★★★
(2)
Part #WB06X10219
Also known as rotating ring assembly.
THERMOSTAT – Part Number: WB20X10048
$22.96
In Stock
THERMOSTAT
★★★★★
★★★★★
(4)
Part #WB20X10048
Introducing the GE Microwave Thermostat - a vital safety component for your microwave. Crafted with precision, this thermostat is specifically designed to prevent overheating scenarios which can cause hazards. Its main function is to promptly cut off power and shut down the microwave if a potential overheating problem is detected. Due to the potential risks associated with high-voltage capacitors within the microwave, the installation of this part should ideally be handled by a professional service technician. Invest in this GE Microwave Thermostat for optimal safety and maximum performance of your appliance. Trust GE for reliable and safe microwave operation.
Diode Cable – Part Number: WB27X10037
$41.67
In Stock
Diode Cable
★★★★★
★★★★★
(3)
Part #WB27X10037
This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical faults or power irregularities occur. Proper application should be verified before installation.
Non-Stick Metal Tray/Pan – Part Number: WB49X10240
$132.23
On Order
Non-Stick Metal Tray/Pan
★★★★★
★★★★★
(1)
Part #WB49X10240
Introducing the GE Advantium Metal Tray, an essential part of your microwave. This non-stick metal tray serves a vital role in your cooking process, revolving in the center of your microwave, thereby ensuring that your food is cooked evenly. Easy to install, this tray accentuates the functionality of your microwave, enhancing your cooking experience each step of the way. Please follow the instructions provided in the owner's manual to ensure correct installation. Trust your microwave needs with the renowned brand GE, a name synonymous with quality and durability in home appliances. Transform your cooking experience with this efficient and high-performing turntable tray.
Cooking Tray – Part Number: WB49X10246
No Longer Available
Cooking Tray
★★★★★
★★★★★
(1)
Part #WB49X10246
NOTE: This is a manufacturer substitution. Part may differ in appearance and size but is a functional equivalent to prior part.This tray rotates in your microwave ensuring more even temperatures.
Magnetron – Part Number: 6324W1A001L
$130.68
In Stock
Magnetron
★★★★★
★★★★★
(8)
Part #6324W1A001L
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron becomes defective, your food may not heat up properly or heat up at all. Additionally, buzzing or humming sounds may be noticeable while the microwave is in operation. With a malfunctioning magnetron, your microwave loses its primary function. To remove it, you first need to unplug your microwave from its outlet. Before touching any components, discharge the capacitor by placing a screwdriver, with an insulated handle, across the two terminals of the capacitor. Once the capacitor is discharged, replace the current magnetron by disconnecting it from any wires and removing any mounting screws or clips. This magnetron is sold individually and is supplied directly from the original equipment manufacturer.
Microwave Thermostat – Part Number: WB21X10149
$27.59
In Stock
Microwave Thermostat
★★★★★
★★★★★
(2)
Part #WB21X10149
This GE Thermostat Thermal Cut-off is a crucial safety component for microwaves. Specifically designed to prevent overheating, it functions as a protective measure by shutting down the appliance if temperatures rise above safe levels. As a key safeguard, it contributes to the long life and efficient performance of your microwave. Due to the potentially hazardous high-voltage capacitors found in microwaves, installation is best performed by a qualified service technician. Make safety a priority; enhance your microwave's performance with this GE Thermostat.
Black Grilling Tray – Part Number: WB49X10241
$108.39
Special Order
Black Grilling Tray
Part #WB49X10241
Non Stick.

Common Symptoms of the SCBC2001CSS00

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 people found this instruction helpful.
  • Kim from Cliffside Park, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Was this helpful?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
66 of 141 people found this instruction helpful.
  • Ralph from Brandon, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The old fuse is perfectly good. The new ones arrived within a day.
Was this helpful?
Thank you for voting!
Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.
40 of 67 people found this instruction helpful.
  • Michael from Ridgefield, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco nnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Was this helpful?
Thank you for voting!