SC550A/2006-02 Bluebird Sod Cutter - Overview

This wheel is a genuine OEM replacement part designed for sod cutters. It is approximately 10 inches in diameter. Each order includes the rubber tire and metal rim as well as the bolt and washer used to secure it. The wheel provides stability and support during operation and allows you to easily maneuver the sod cutter. The wheel will nee...Read mored to be replaced if it is worn down punctured or the rim is damaged. A faulty wheel will result in unstable movement poor cutting performance uneven cutting depth. To remove and replace the wheel first ensure the sod cutter is turned off and the engine is cooled. Remove the fasteners holding the wheel and carefully slide the old wheel off the axle. Place the new wheel on the sod cutter axle and install the new bolt. Ensure the wheel is stable before operating the sod cutter. Each wheel is sold individually.

This genuine OEM bearing flange is 4 inches long and 2.5 inches wide. The flange is used to secure bearings (sold separately) to provide support moving parts in aerators, such as the rotating shafts/axles. Each bearing in your aerator requires two flanges each. This protects the parts from friction damage and allows them to spin smoothly....Read more The flange also helps to secure the bearing in place and prevent it from coming loose or falling inside the equipment. You will need to replace your flange bearing if your equipment is making grinding noises during use or if the flange is corroded, or chipped. Each flange is sold individually.

This is a genuine OEM bearing which is designed for use with lawn and garden equipment and is sold individually. Made of high-quality metal and measuring at a 1-inch inner-diameter, this bearing will likely need to be replaced often because it is a high-wear part. This bearing is used to distribute weight evenly using small inner balls wi...Read morethin the bearing itself, and the locking collar fastens the bearing onto the shaft to reduce movement from motor vibrations. If you are unsure of how many bearings your equipment will need, make sure to check any available diagrams.

This steel bearing is an OEM replacement for aerators and has a .75-inch inner-diameter. Bearings have tiny balls within them which are used to distribute weight evenly and minimize friction between two moving parts. It is sold individually but comes with a .75-inch inner-diameter locking collar as well, although a stamping kit is sold se...Read moreparately. The locking collar is used to tighten the bearing on the shaft, to reduce the effects of vibrations during operation, like slipping. It is made of high-quality metal but is considered a high-wear part meaning it will likely need to be replaced often.

This 26-5/8 transmission chain is designed for and compatible with various models of aerator and sod cutters, where it powers the equipment through the engine and drive sprockets. This is the main engine chain that connects to the engine sprocket, which is what rotates this chain and should also be inspected if you suspect this chain need...Read mores replacing. If you hear excessive noise, chain slipping, or have difficulty when shifting gears, it is recommended that you inspect the chain for wear and damage. Although this chain is made of high-quality metal, it can wear down over time and will need to be replaced. However, regular maintenance, lubrication, and upkeep will prevent you from having to replace it as frequently. This chain is an OEM part and is sold as an individual part and includes the clip-style master link. To replace this chain, you will need a chain breaker, wrench, and screwdriver. Turn off your machine and allow it to cool, and then gain access to the main transmission using your screwdriver/wrench. Use the chain breaker tool to disconnect and remove the old chain from the engine sprocket and install the new one.

A genuine item which is supplied by the original manufacturer for use with Husqvarna and Bluebird lawn and garden equipment. It is a high-quality replacement for a missing or damaged cable which allows a user to control the throttle. On one end it connects to the carburetor and on the other to the throttle lever, please make sure to refer...Read more to the appropriate diagrams of your sod cutter for the correct application of this component. Keep in mind this durable rubber insulated cable is sold individually.

The rim sprocket goes next to the bearing. This item is available as an individual replacement part. It is a Bluebird replacement part directly sourced from the manufacturer for use in aerator and sod cutters. During the installation process, a screwdriver and a set of pliers might be needed to replace this item. This part is made out of metal and will need to be replaced if it breaks.

A sprocket is designed to transfer power through a machine, notably within engines and bikes, through the use of chains in a transmission. Sprockets have teeth or cogs that grab onto the links of a chain, and as the sprocket is rotated, the power is transferred to the chain. That chain transfers power through the transmission and uses the...Read more gear that is selected to modify the speed at which the machine runs. This is a genuine OEM drive sprocket that has 8 teeth and is fit for a standard #40 chain, measuring a 1/2-inch pitch and is designed for use within different small engine power equipment models. This sprocket is made of high-quality metal, but due to its high-wear use, it can wear down over time and cause chain skipping resulting in excessive noise and vibrations, and chain elongation issues - all of which are reasons to replace it immediately to avoid any future safety hazards. To replace it, you will need tools such as a socket wrench, pliers, a chain breaker tool, a replacement chain if necessary and grease. Simply remove the old chain with the chain breaker tool and take note of its positioning. Remove the old sprocket and any hardware with your wrench and pliers (if necessary) and install the new sprocket, before installing the chain on the same route and direction as before, ensuring it is properly tensioned. Lubricate the chain if it is not already adequately lubricated to ensure smooth performance and avoid premature wear.

This is a genuine manufacturer-approved replacement idler pulley which is specially designed for Husqvarna sod cutters. The purpose of this pulley is to apply tension to the belt, unfortunately, over time it will wear out and may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of you...Read morer model for the correct location and application of this component, It is a high-quality idler pulley which is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine manufacturer-sourced part which is specially designed for Bluebird sod cutters and aerators. It is an identical replacement for a missing or damaged spring that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardwar...Read moree. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an OEM part sourced directly from the manufacturer. The key is designed for use in aerators, sod cutters, and power rakes from Bluebird and Husqvarna. This part is made of metal, and is generally used to hold a wheel in place on a shaft. It may be found in various locations in the machine, depending on model. Please refer to t...Read morehe parts diagram to be sure of ordering the correct part. You may require a wrench and pliers when replacing this part. This item is sold individually.