SC18 (2003-07) Bluebird Sod Cutter - Overview

This genuine OEM bearing flange is 4 inches long and 2.5 inches wide. The flange is used to secure bearings (sold separately) to provide support moving parts in aerators, such as the rotating shafts/axles. Each bearing in your aerator requires two flanges each. This protects the parts from friction damage and allows them to spin smoothly....Read more The flange also helps to secure the bearing in place and prevent it from coming loose or falling inside the equipment. You will need to replace your flange bearing if your equipment is making grinding noises during use or if the flange is corroded, or chipped. Each flange is sold individually.

This is a genuine OEM bearing which is designed for use with lawn and garden equipment and is sold individually. Made of high-quality metal and measuring at a 1-inch inner-diameter, this bearing will likely need to be replaced often because it is a high-wear part. This bearing is used to distribute weight evenly using small inner balls wi...Read morethin the bearing itself, and the locking collar fastens the bearing onto the shaft to reduce movement from motor vibrations. If you are unsure of how many bearings your equipment will need, make sure to check any available diagrams.

This steel bearing is an OEM replacement for aerators and has a .75-inch inner-diameter. Bearings have tiny balls within them which are used to distribute weight evenly and minimize friction between two moving parts. It is sold individually but comes with a .75-inch inner-diameter locking collar as well, although a stamping kit is sold se...Read moreparately. The locking collar is used to tighten the bearing on the shaft, to reduce the effects of vibrations during operation, like slipping. It is made of high-quality metal but is considered a high-wear part meaning it will likely need to be replaced often.

This flange bearing is a genuine part from the original equipment manufacturer for use with aerators to secure the bearing within the rotor mechanism. This part comes with two flange bearings and the necessary hardware to secure it within your equipment. For exact positioning with your equipment model, refer to any diagrams or user manuals.

This 26-5/8 transmission chain is designed for and compatible with various models of aerator and sod cutters, where it powers the equipment through the engine and drive sprockets. This is the main engine chain that connects to the engine sprocket, which is what rotates this chain and should also be inspected if you suspect this chain need...Read mores replacing. If you hear excessive noise, chain slipping, or have difficulty when shifting gears, it is recommended that you inspect the chain for wear and damage. Although this chain is made of high-quality metal, it can wear down over time and will need to be replaced. However, regular maintenance, lubrication, and upkeep will prevent you from having to replace it as frequently. This chain is an OEM part and is sold as an individual part and includes the clip-style master link. To replace this chain, you will need a chain breaker, wrench, and screwdriver. Turn off your machine and allow it to cool, and then gain access to the main transmission using your screwdriver/wrench. Use the chain breaker tool to disconnect and remove the old chain from the engine sprocket and install the new one.

The rim sprocket goes next to the bearing. This item is available as an individual replacement part. It is a Bluebird replacement part directly sourced from the manufacturer for use in aerator and sod cutters. During the installation process, a screwdriver and a set of pliers might be needed to replace this item. This part is made out of metal and will need to be replaced if it breaks.

This is a genuine manufacturer-approved replacement idler pulley which is specially designed for Husqvarna sod cutters. The purpose of this pulley is to apply tension to the belt, unfortunately, over time it will wear out and may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of you...Read morer model for the correct location and application of this component, It is a high-quality idler pulley which is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine manufacturer-sourced part which is specially designed for Bluebird sod cutters and aerators. It is an identical replacement for a missing or damaged spring that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardwar...Read moree. Keep in mind this high-quality item is made of durable metal and is sold individually.

It is a genuine manufacturer-approved replacement part that is specially made for use with Husqvarna and Bluebird sod cutters. This is the front wheel which helps to keep unit mobile for easy transportation. It is a complete item which includes a durable metal rim with a rubber tire and it is sold individually, please note the hardware to secure it is included.

This is an authentic OEM sourced part is which is specially designed for use with Husqvarna and Bluebird sod cutters. It is an identical replacement for a missing or a faulty chain which helps to drive the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. ...Read moreKeep in mind this high-quality item is made of durable metal and is sold individually.