SC10 - Parts

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal and it is sold individually. Replacing this item you would need a wrench and pliers.

It is an authentic high quality piece of hardware commonly utilized on walk behind lawn mowers. This nut is supplied directly from original equipment manufacturer. It is generally used to secure the trail shield. Please note, this metal square nut is sold individually.

This Air Cleaner Kit is an OEM part direct from MTD for use in a walk-behind lawnmower. The purpose of the air cleaner is to keep dust and debris from entering the carburetor and engine. This kit includes one paper filter and one foam filter. The paper filter cannot be cleaned and needs to be replaced once a year. The foam filter can be c...Read moreleaned by using liquid detergent and water, replace the foam element when damaged. Never run the engine without the filters as this can result in rapid engine wear.

This oil fill tube assembly is supplied by the original manufacturer for use in a variety of lawn and garden equipment. It includes a plastic tube and one dipstick O-ring (dipstick sold separately). The assembly allows the user to easily access and replenish the oil. It is responsible for ensuring that the engine is adequately lubricated ...Read morefor smooth operation and prevention of friction damage. The oil fill tube assembly will need to be replaced if the tube is damaged, or the threaded caps on either end are stripped. A faulty oil fill tube assembly will result in oil leaks, inadequate lubrication, poor engine performance, and eventual engine damage if left unaddressed. Remove the equipment housing to access the engine block. Remove any fasteners and components blocking access to the tube. Gently pull the oil fill tube off the engine and remove the O-ring. Clean the sealing surface and press the new O-ring into place. Position the new tube on the mounting surface and ensure it is secure and stable. Reassemble the equipment in reverse order.

This is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this high-quality rubber insulated metal cable is sold individually.

This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is designed to connect and disconnect individual parts together without using any tools. By loosening the knob, you can easily adjust the height of...Read more the handles on your equipment to your liking as well as fold the handles for proper storage. Over time the handle knob can wear down or break. If this happens, you will need to unscrew the knob and remove the old rope guide before you can place the new knob on. Place the new rope guide in position, thread the eye of the cable through the eye hook loop and finally thread the new knob on to the shaft and turn it clockwise with your hands until it is secure.

It is a genuine OEM supplied replacement part that is designed for use with walk-behind lawn mowers. This special screw is used to secure the chute deflector bracket to the main deck. It is a high-quality hardware which is made of durable metal and it is sold individually, please note you will need a wrench to install or remove it.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

This is an original replacement part manufactured for use with walk-behind lawnmowers. The metal rope guide mounts to the side rail of the handle, and is secured by a handle knob. The rope guide keeps the starter rope on the upper handle for ease of access, and to keep the rope out of the way while operating. The rope guide is sold individually.