S652DG Ryobi Sander Polisher - Overview

This is a genuine OEM replacement part designed for use with Ryobi Sander. This assembly consists of Plastic Platen with Metal Springs, Foam Pad with Metal Backing Plate and a Dust Shield. This is the part of the sander that holds the Sandpaper. Please note, it does not include the bearing. To replace this Platen Assembly you would nee...Read mored a Phillips Head Screwdriver. • Remove the 4 Screws holding old Platen • Take off the old Platen by pulling it off the Bearing • Press new Platen on the Bearing • Attach the new Assembly using the 4 Screws

This is a genuine Ryobi replacement part. The pad is what the sandpaper is attached to by the clamps on the platen assembly. It includes the metal backing on the back of the pad. To remove the pad, simply remove the four phillips head screws that attach the pad to the platen.

It is an original manufacturer supplied replacement item and is sold individually. This ball bearing is sealed on both sides. Ball bearings are made to reduce friction between two rotating parts. Because they experience constant pressure they would need to be checked and replaced periodically to ensure top performance. Please check diagrams for correct location and application of this bearing.

This is an authentic Ryobi replacement part manufactured for use with 1/4 sheet double insulated sanders. Carbon brushes will wear out eventually because they are in constant contact with the rotating armature while the sander is in use. Worn brushes can cause the motor to spark or smoke, and can also cause the sander to turn off and on while in use. This brush is sold individually.

This replacement 60 grit sandpaper is a genuine OEM sourced item, not an aftermarket imitation. This is a PSA hook and loop sandpaper. The hooks engage into the loop and provide the closure mechanism. Please note, this item includes (1) sheet of sandpaper per order. Replacing this sandpaper is a very simple task that does not require any...Read more tools. • Unplug the sander • Release the paper clamp • Insert end of the sandpaper approximately 1/2" under the paper clamp • Lift up on paper clamp lever and lock into place • Wrap sandpaper around cushion • Fit sandpaper against cushion tightly • Lift up on lever and lock into place

This is a genuine OEM sandpaper designed for use with Ryobi sander. This is a PSA hook and loop sandpaper. The rough side is called hook and soft side is called loop. The hooks engage into the loop and provide the closure mechanism. . This sandpaper is made out of abrasive minerals with paper backing. It is a non-adhesive sandpaper and it...Read more is sold individually. No tools needed to replace. • Unplug the sander • Release paper clamp by lifting up on lever, and disengaging it from the tab on the platen • Insert end of new 1/4 sheet sandpaper approximately 1/2" under the paper clamp • Lift up on paper clamp lever and lock into place • Apply downward pressure to conform sandpaper to platen • Wrap sandpaper around cushion • Lift lever on opposite end of sander and insert loose end of sandpaper under paper clamp • Fit sandpaper against cushion tightly • Lift up on lever and lock into place

This is a genuine Ryobi replacement part, it is sold individually. The purpose of the 039066005050 Spring Clamp is to clamp the sandpaper to the platen of the sander. Once the sandpaper is placed on the sander the spring clamp is pulled up and attached to the side of the platen to secure the sandpaper. If you want to order the spring cla...Read moremps already attached to the Platen you can order part number 039066005054 Platen Assembly.

This is a genuine item that is supplied by the original equipment manufacturer for use with Ryobi sanders. It is an identical replacement for a missing or a faulty hole punch that was installed on a new unit. The part helps to secure a sandpaper sheet. Please make sure to check the owners manual and the appropriate diagrams of your model ...Read morefor the correct location and application of this component. Keep in mind this high-quality hole punch is made of durable plastic and is sold individually.