RY60520 Ryobi Tiller - Overview

The OEM Air Filter is used to stop debris and particles from entering the carburetor and engine, which could cause damage. It is attached in the air filter housing. It comes in black, and is contructed from foam. Installation is rated as "Easy" by customers, and will require a screwdriver. (Tip: You can place the filter in a plastic bag w...Read moreith a bit of oil, remove it, and then squeeze the filter to drain the excess oil. The remaining oil will work as a sticky trap). If the part becomes worn over time, the engine will be hard to start and will run rich. In this case, replace the part. Refer to your make, model and diagram to ensure this is the correct part for you.

This replacement starter housing assembly is an authentic OEM sourced part, not an aftermarket imitation. It is specially designed for Ryobi gas cultivators. This is assembly allows user to easily start the unit by pulling on the starter rope. It includes the plastic housing, starter pulley, recoil spring, plastic grip and the pull rope. ...Read morePlease note, the hardware to secure this starter assembly is sold separately. To replace this recoil starter assembly you will need a wrench. • First remove the screws that secure old starter assembly • Remove old assembly and secure the new one

It is a genuine OEM approved component that is specially made for use with handheld lawn and garden equipment. The purpose of this clip is to secure the fuel line, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Unfortunately, over time parts may wear out, get ...Read moredamaged or simply lost eventually requiring a replacement. Please note this high-quality clip is made of durable metal and is sold individually.

This is a genuine Ryobi replacement fuel tank assembly. It is supplied directly from original equipment manufacturer. It is commonly used with gas powered cultivators. Over time fuel tank or fuel hose may deteriorate allowing for air leaks. It should be periodically inspected and replaced immediately if it is damaged or leaking. Make sure...Read more to drain the gas tank before starting a repair. It is made out of plastic and it includes the fuel tank, fuel lines and the fuel cap. Please not the hardware to secure the tank is sold separately.

This is an authentic OEM sourced component which is specially designed for Ryobi, Homelite and Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty clip that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application ...Read moreof this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This part is available individually and made out of metal. The Clutch Assembly fits between Fly-Wheel Assembly and Front Housing Assembly. This is an OEM part directly sourced from the manufacturer for use in Gas Cultivator, String Trimmer, Brushcutter made by Ryobi, Homelite, Toro. During the installation, a screwdriver, a socket set, and a wrench set may be needed to help replace this part.

This is an original replacement part manufactured for use with cultivators, blowers, and trimmers. The socket head screw is commonly used to secure the starter housing to the engine. This socket head screw is used with several types of equipment and can have multiple uses. This screw is available as an individual replacement part, please see model diagram for part location and usage.

This OEM tine assembly in your cultivator or tiller is a rotating blade that helps dig and till the soil. It is located beneath the machine and is attached to a shaft. A broken assembly can be identified by visible damage, cracks, or missing pieces. If your machine leaves large chunks of soil untouched or exhibits excessive vibration and ...Read morenoise, it may indicate a misaligned assembly. When replacing the tine assembly, use pliers to remove the cotter or hitch pin securing it to the gearbox. Since your machine has multiple tine assemblies, consult your user guide to ensure you purchase the correct replacement.

This pipe-return is a genuine OEM sourced component. It is specially designed for use with Ryobi gas powered equipment. This is the line that the fuel travels through. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through t...Read morehe return line. Over time these rubber lines will become brittle and they may begin to crack eventually requiring replacements. Please note, one durable flexible fuel line is included. Check the appropriate diagrams for your model to ensure the proper repair procedure.