My Orders
RY4CPH (090432034) Ryobi Trimmer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
UPPER BOOM ASSEMBLY
Part #308470060
This is a genuine item that is sourced directly from the parts manufacturer for use with a Ryobi string trimmer. The upper boom assembly connects the motor head to the lower boom assembly. This part is made if of a high-quality metal and is sold as an individual replacement part.
No Longer Available
Fuel Tank Assembly
Part #310585012
This OEM sourced replacement fuel tank assembly is designed for use with Ryobi string trimmers. It is made out of plastic and it includes the fuel tank, fuel lines, fuel cap and the fuel filter. Please note the screws used to secure it are sold separately. It is very important to replace the fuel tank if it is cracked or damaged to avoid ...Read moredamage or serious injuries. Make sure to drain the gas tank before starting a repair.
Read less
$6.40
In Stock
Switch
Part #760961002
This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning on, or this switch feels loose within its housing, it may be time to replace it. To remove it, separate the two halves of the housing which...Read more it connects to, disconnect the throttle and other wires with pliers, and depress the securing tabs. To install the new switch, click it into place within the housing and connect the appropriate wires to the two terminals, and then reconnect the throttle cable and other wires, and then simply align the two halves of the housing and secure with screws.
Read less
$6.40
In Stock
Spring
Part #06713
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.
Read less
$7.08
In Stock
BOOM CLAMP ASSEMBLY
Part #312630001
$2.99
Special Order
Fuel Filter
Part #310976001
This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the carburetor and engine and are made of metal with a fabric filter material, meaning this filter will eventually clog and need to be replaced. ...Read morePlease note that the fuel filter should be inspected regularly, not solely when it is clogged. The filter will be attached to the fuel line within the fuel tank and if your equipment is having starting, revving, or idling issues, the fuel filter may be the reason why. To replace it, simply use a hook to pull the old filter out from the fuel tank, use pliers to remove any clamps attached to the end of the fuel line, and pull the filter off. Attach the new filter to the fuel line, along with the clamp, and set the filter back into the tank.
Read less
$6.40
In Stock
AIR FILTER
Part #901723001
This is an air filter for a wide range of trimmers. Air filters are designed to prevent dust, dirt and debris from entering the carburetor and clogging and damaging the engine. This air filter is made of foam and comes as an individual OEM part. If you have noticed poor performance from your trimmer, or notice the air filter is missing or...Read more clogged, it needs to be replaced immediately to not only get full functionality from your trimmer, but to avoid damaging any other components. Replacing this air filter is easy and does not require any tools. First, apply a small amount of oil into the air filter so it can catch any and all debris. Then simply disconnect and remove the air filter cover and then replace the air filter inside and reinstall the air filter cover.
Read less
No Longer Available
Air Box Base
Part #308398005
This is an authentic Ryobi replacement air box base that is specially designed for use with string trimmers. It is sourced directly from original equipment manufacturer. The purpose of this item is to secure the air filter which is sold separately. Replacing this part you will need a screwdriver. • Remove the cover • Remove the air...Read more filter • Remove screws that secure the base • Remove the old air box base • Secure the new one in place • Reassemble and test the unit
Read less
$6.40
In Stock
GASKET
Part #570709002
This replacement gasket is an authentic OEM item that is specially designed for Ryobi lawn and garden equipment. This gasket provides an air-tight seal for the oil pan. Over time gaskets tend to shrink, become brittle and crack eventually requiring a replacement. It is made from high quality composite material and it is sold individually.
No Longer Available
Carburetor Assembly
Part #309375002
This carburetor is for line trimmers.
Carburetor mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
$6.86
In Stock
Clutch
Part #300960002
This is an OEM sourced replacement part used on gas trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keepin...Read moreg an eye on equipment performance will determine when the centrifugal clutch requires attention. Please note the clutch drum, spacer and washer are all sold separately. This clutch is made out of metal and it is sold individually. To replace this item you would need a screwdriver and pliers.
Read less
$6.43
In Stock
SPARK PLUG
Part #870301002
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Choke lever snapped off.
3 of 3 people
found this instruction helpful.
Remove air cleaner cover and filter, remove air box base (2 bolts). Simply reverse order to reinstall. Side notes: 1) The air box itself comes complete with a new filter, so no need to order that separately unless you want some spares. They're only $0.86 each anyway, so you might as well while you're at it. 2) Part was perfect in fit and
... Read more
function. 3) The prices here are so ridiculously low, I don't know how they make any money. I'll most definitely be back!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!