RY41131 Ryobi Trimmer - Overview

This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a right hand thread, and it is used to secure the spool within the trimmer head to prevent it from coming loose during operation. The retainer ...Read moreengages with the trimmer head to lock the spool in place, while it also advances the cutting line for greater cutting efficiency. If the threads on the retainer bolt wear out or the plastic body becomes damaged, the retainer will be unable to engage with the trimmer head, causing the line to tangle, the spool to come loose, and lowering the cutting performance of the trimmer. Remove the trimmer head cover and detach the retainer from the assembly. Position the new spool retainer in the assembly and thread it firmly into place.

This cutting head is for line trimmers. The cutting head attaches to the driveshaft and houses the cutting line. Wear work gloves to protect your hands when installing this part.

Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.

Genuine OEM replacement part, this item is sold individually. This is the part of the trimmers listed below that the cutting line is installed in. This spool uses .095 diameter cutting line. If you would like to obtain the complete cutting head assembly with the line already installed, order part number 309562002

Genuine OEM replacement part used on some models of Gas String Trimmers. This part is made out of Plastic with included Metal Eyelet. This part holds and secures the Spool. Please note: Spool, Spring and the Spool Retainer are all Sold Separately.

This item is a genuine OEM sourced replacement part that is intended to be used with strimmers from Ryobi and Homelite. The metal fasteners are used to secure the cutting head guard to the lower portion of the lower boom assembly. This item may require a hex socket wrench to install.

This is an original Ryobi replacement part manufactured for use with trimmers. The front handle will come with a bolt and butterfly nut to secure the handle to the trimmer shaft, so additional hardware is not necessary. This front handle assembly can be used with some electric powerheads and is sold individually.

It is an authentic OEM replacement part for a Ryobi String Trimmer. When the Switch Trigger is pressed it powers the motor to work the string trimmer. If the trigger fails to start the motor then it is possible it needs replacement. This part is made of durable plastic and is sold separately. Please refer to your model's diagram for any associative parts.