My Orders
RY40021 Ryobi Trimmer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cutter for feeder broke off and required replacement of new deflector assembly
5 of 5 people
found this instruction helpful.
-
Charles T from WALDORF, MD
- Very Easy
- Less than 15 mins
-
Screw drivers
Repair was quick, simple and easy. Only tool needed was a phillips head screwdriver. Removal of three screws, remove old deflector, attach/align new deflector, insert screws and tighten. That's all to it. less than 2 minutes.
Was this helpful?
Thank you for voting!
Cover broke
4 of 4 people
found this instruction helpful.
-
Dennis from ARVADA, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed three screws/cover replaced cover and screws
Was this helpful?
Thank you for voting!
motor burned out
1 person
found this instruction helpful.
-
Nick from BOCA RATON, FL
- Easy
- 30 - 60 mins
-
Pliers
New motor was pretty much plug and play. Grass trimmer has about a dozen 2,5mm hex screws that hold the halves of the head together. Once unscrewed, there are two stickers that need to be peeled off with a blade (I used contact adhesive to reseat them after) and then everything comes apart. The motor has spade connectors but my origina
... Read more
l motor had pigtails so I chopped them off and crimped on some female connectors. Everything works like new!
Read less
Was this helpful?
Thank you for voting!