RY09465 Ryobi Leaf Blower / Vacuum - Overview

This authentic OEM starter rope measures 42-inches and is for use with various models of outdoor power equipment. Made of nylon, this rope wraps around the starter recoil spring and when pulled, is used to start the engine. This rope is sold as an individual part, so any necessary grips are sold separately.

This replacement fan is an authentic manufacturer sourced part. It is specially designed for use on Homelite and Ryobi blowers. This is the main fan that produces the air flow. Please note washers and lock nut used to secure this fan are all sold separately. This blower fan is made out of black plastic and it is sold individually per orde...Read morer. To complete this repair you will need a screwdriver and a wrench. • Ensure the blower is not powered up • Remove the cover screws • Separate the cover from the housing • Remove the lock nut that secures the fan • Replace old fan with a new one • Reassemble and test the blower

This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the carburetor and engine and are made of metal with a fabric filter material, meaning this filter will eventually clog and need to be replaced. ...Read morePlease note that the fuel filter should be inspected regularly, not solely when it is clogged. The filter will be attached to the fuel line within the fuel tank and if your equipment is having starting, revving, or idling issues, the fuel filter may be the reason why. To replace it, simply use a hook to pull the old filter out from the fuel tank, use pliers to remove any clamps attached to the end of the fuel line, and pull the filter off. Attach the new filter to the fuel line, along with the clamp, and set the filter back into the tank.

This is an authentic OEM sourced replacement momentary contact switch. It is specially designed for Homelite and Ryobi blowers and vacuums. It is the part of the tool handling on and off function of the tool. Please note, these mechanical switches have will over time wear out requiring replacement. This switch has a plastic body and it is sold individually. To replace this item no tools would be needed.

This is an OEM replacement part,it is sold individually. The purpose of the Air Purge Bulb is to purge all of the air from the carburetor. It then brings fuel up through the fuel line in the tank into the carburetor. Once the carburetor is full of fuel the Bulb will force the excess fuel back into the tank through the fuel return line. ...Read moreOver time the bulb will loose it elasticity or begin to crack, it will need to be replaced at this time.

This genuine part is supplied by the original equipment manufacturer for use with Ryobi handheld lawn and garden equipment. The cap is designed to keep the fuel in the tank. Note that it is a vented cap that lets the air back into the tank so a vacuum is not created. It provides an identical replacement for a missing or a faulty component...Read more that was included with a new unit. Please make sure to check the diagrams of your model for the correct location and installation. Keep in mind this high-quality fuel cap assembly is made of durable plastic and is sold individually.

This is an authentic OEM sourced replacement screw. It is specially manufactured for use with a variety of handheld lawn and garden equipment. This is a standard hardware which has multiple applications based on your unit. Please refer to appropriate diagrams for correct location and application of this screw. This screw is made out of me...Read moretal and it is sold individually. To remove or install it you will need a torx screwdriver.

This replacement ignition module is and authentic part supplied directly from original equipment manufacturer. It is commonly used on Ryobi trimmers/brushcutters and blowers. Ignition module (armature-magneto) is designed to supply electric current to the ignition system by producing continuous pulses of high voltage for the spark plugs. ...Read moreIt is made out of metal with rubber boot. Includes one (1) magneto per order. To complete this repair you would need screwdriver set. • Remove the spark plug boot • Remove the air filter housing • Remove other shrouds/housings • Disconnect ignition wires • Disconnect spark plug boot • Face flywheel magnet to ignition module position • Install new module in place • Reassemble and test the unit

This is a genuine OEM sourced replacement part which is specially designed for use with Ryobi backpack blowers. The purpose of this component is to mix the gas and the air before sending the combustible mix to the engine, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality metal body carburetor is sold individually.

This is an original Ryobi replacement part manufactured for use with lawn and garden equipment. The plastic starter grip sits at the end of the starter rope and is pulled to start the engine. This starter grip is available individually, please see model diagram for associative parts.

(M4 x 12 mm)