RVM1325BW02 Hotpoint Microwave Parts & Repair Help | PartSelect
Models > RVM1325BW02

RVM1325BW02 Hotpoint Microwave - Overview

Sections of the RVM1325BW02

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(19)
PartSelect #:PS247209
Manufacturer #:WB36X10003
This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside o...
$17.24
In Stock
(8)
PartSelect #:PS230544
Manufacturer #:WB08X10016
This light bulb socket that is used in microwaves. The socket is meant to fit small-base light bulbs. * Please note: The light bulb is not included with this part and is sold separ...
$21.40
In Stock
(13)
PartSelect #:PS247275
Manufacturer #:WB36X10071
The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notic...
$11.59
In Stock
(32)
PartSelect #:PS237421
Manufacturer #:WB24X829
The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open (normally opened). The switch monitors the door latch position...
$23.34
In Stock
(2)
PartSelect #:PS255242
Manufacturer #:WB6X486
This aluminum filter collects grease particles in the air from cooking. Sold individually.
$56.30
In Stock
(4)
PartSelect #:PS237422
Manufacturer #:WB24X830
Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door bef...
$23.50
In Stock
PartSelect #:PS232262
Manufacturer #:WB15X337
Handle only. Screws are not included.
No Longer Available
(2)
PartSelect #:PS3511445
Manufacturer #:WE02X10086
Sold individually.
$2.02
In Stock
PartSelect #:PS234666
Manufacturer #:WB1X1525
No Longer Available
(1)
PartSelect #:PS249692
Manufacturer #:WB48X194
$151.79
In Stock
Questions and Answers for RVM1325BW02
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

Secondary Door Switch – Part Number: WB24X829
  • Customer: Marla from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 282 of 318 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 207 of 235 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it... read more

bulb had broken off in base that was still screwed into socket

Light Bulb - 40W 130V – Part Number: WB36X10003
  • Customer: william from san antonio, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 85 of 89 people found this instruction helpful
At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you can drop the entire b... read more