RUD3000DQ3 Roper Dishwasher Parts & Repair Help | PartSelect
Models > RUD3000DQ3

Manuals & Care Guides for RUD3000DQ3

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(13)
PartSelect #:PS11755809
Manufacturer #:WPW10509257
This gasket wraps around the sides and top of the dishwasher door and helps seal the door when it is closed to prevent water from leaking from the dishwasher during the washing cyc...
$58.41
In Stock
PartSelect #:PS11741257
Manufacturer #:WP3368921
7-18 x 3/4" - sold individually.
$4.49
In Stock
(6)
PartSelect #:PS11744874
Manufacturer #:WP8066018
The dishwasher lid spring helps open the dispenser cover in the soap box when the control releases the latch. If your dishwasher does not dispense detergent, is broken and worn out...
$4.83
In Stock
PartSelect #:PS11743934
Manufacturer #:WP717273
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where...
$5.55
In Stock
(1)
PartSelect #:PS11743008
Manufacturer #:WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...
$5.88
In Stock
(11)
PartSelect #:PS11730996
Manufacturer #:W10844024
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...
$60.96
In Stock
(10)
PartSelect #:PS11741341
Manufacturer #:WP3378134
This cap does not require the use of an O-ring seal. The wet agent assembly cap is clear in color and made of plastic. This is a part for your dishwasher. This part may need to be ...
$5.93
In Stock
(1)
PartSelect #:PS11741308
Manufacturer #:WP3372028
The lid hinge pin or detergent lid pin on your dishwasher helps dispense your dish detergent when your dishwasher is running. The pin fits with the dispenser lid and allows the lid...
$7.16
In Stock
(7)
PartSelect #:PS382922
Manufacturer #:676413
This soap cup latch kit, used in a dishwasher, will keep the dispenser cover closed. If your dishwasher will not dispense detergent, there is a door latch failure, the dishes are n...
$5.93
In Stock
(5)
PartSelect #:PS11741289
Manufacturer #:WP3369769
This panel is reversible, black on one side, white on the other side.
$25.27
In Stock
Questions and Answers for RUD3000DQ3
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher leaking at bottom of door

  • Customer: Eileen from Salt Lake City, UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 200 of 205 people found this instruction helpful
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged wit... read more

Worn out spring on detergent release box lid

  • Customer: HAROLD from FISHERSVILLE, VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 78 of 90 people found this instruction helpful
First, examine very carefully how the old spring relates to the detergent release box lid. Note that the top of the spring has a square-end upside down "U" . This rests on a small ledge on the detergent box. Also note that on either end of the spring is a straight extension of the spring wire. These two "legs" must rest on the inside of the edge of the de... read more

Water was dripping out of the front of the unit down low.

  • Customer: Phil from atascadero, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 71 of 75 people found this instruction helpful
I removed the old gasket, installed the new one which took about 20 seconds.Tested the unit, water was still dripping, but in a different fashion.As per a previous poster's instructions I removed the vent cover. (Located inside the dishwasher up high.)I cleaned out the calcium deposits with hot water and a sacraficial toothbrush. "Ta-Da!" Everything is now g... read more