RTW4641BQ1 Roper Washer Parts & Repair Help | PartSelect
Models > RTW4641BQ1

RTW4641BQ1 Roper Washer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(29)
PartSelect #:PS3497627
Manufacturer #:W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the wa...
$44.97
In Stock
(16)
PartSelect #:PS11747978
Manufacturer #:WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$33.88
In Stock
(16)
PartSelect #:PS10057144
Manufacturer #:W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch...
$46.30
On Order
(1)
PartSelect #:PS11742027
Manufacturer #:WP3949550
This part goes on the agitator retaining bolt.
$13.40
In Stock
(17)
PartSelect #:PS3502189
Manufacturer #:W10440729
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-pie...
$9.44
In Stock
(1)
PartSelect #:PS385132
Manufacturer #:72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...
$8.44
In Stock
(2)
PartSelect #:PS11740613
Manufacturer #:WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washe...
$8.60
In Stock
(2)
PartSelect #:PS11748588
Manufacturer #:WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$7.76
In Stock
(2)
PartSelect #:PS11741199
Manufacturer #:WP3355758
This is the cap for your agitator.
$8.60
In Stock
(1)
PartSelect #:PS11746209
Manufacturer #:WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$8.60
In Stock
Questions and Answers for RTW4641BQ1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Defective lid latch - Cabrio Washer

Lid Latch Assembly – Part Number: W10404050
  • Customer: William from Wakefield, RI
  • Difficulty: Very Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 69 of 83 people found this instruction helpful
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installati... read more

Noise on bottom of Washer louder as time went on. 1 1/2 years

  • Customer: Jerry from WALLA WALLA, WA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 48 of 62 people found this instruction helpful
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so yo... read more

Washer was off balance during spin cycle. The suspension piece broken.

  • Customer: Joseph from PERKINS, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 45 of 66 people found this instruction helpful
Replaced 1 of 4 of the suspension bushing. Works great. read more