RTR-646 Caloric Cooktop - Overview

Diagrams for RTR-646

See every part. Know exactly what you need.

Page 1

Parts for the RTR-646

Gas Burner Grate

Part #WP305810B

This is a gas burner grate and goes over the stovetop on your range.The grate provides a balanced surface for your cookware to rest on while cooking. This burner grate is made of square wire and is black in color. It is roughly nine inches long and nine inches high. If your current grate is damaged or showing signs of wear, it will need to be replaced.

Spark Ignition Module with Bracket

Part #32020101

This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a cert...Read more

Read less

$8.55

Stand Mixer Screw

★★★★★

(1)

Part #WP4159193

This screw is sold individually.

Spark Switch

Part #Y0042053

This switch is used with gas ranges and ovens. The part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.

$21.45

SCREW

Part #W11245710

Sold individually.

Licon Spark Switch

Part #Y0042037

DISCONTINUED

Part #Y0042657

TOP BURNER GT-483

Part #Y0042356

USE WPL 214597

Part #Y0041769

VALVE, HARPER SURFACE GT-451

Part #Y0042324

GRILLE ALUM GRILL TOPS

Part #Y0042702

LOCATING PIN GT-583

Part #Y0041894

Common Symptoms of the RTR-646

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

2 of 4 burners wouldn't light

25 of 29 people found this instruction helpful.

John from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers

Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one ... Read more

Read less

Was this helpful?

Spark did not ignite one burner and sometimes two

14 of 16 people found this instruction helpful.

Frederick from Eagle, WI
Really Easy
15 - 30 mins
Screw drivers

I could not figure out how to get to the igniter until I went to the "Part Select" web site and found a post that was exactly like the problem that I had. IE: Remove two screws holding each burner, Lift off top, remove old igniter being "Carefull" not to mix up the wires when putting them on the new one, installed new igniter in bracket a ... Read more

Read less

Was this helpful?

just wanted new stove top grates

15 of 28 people found this instruction helpful.

mary from saxonburg, PA
Really Easy
Less than 15 mins

opened package and put grates in place

Was this helpful?