RTG5243BL0 Roper Washer Dryer Combo Parts & Repair Help | PartSelect
Models > RTG5243BL0

RTG5243BL0 Roper Washer Dryer Combo - Overview

Manuals & Care Guides for RTG5243BL0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(309)
PartSelect #:PS11741460
Manufacturer #:WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 in...
$19.91
In Stock
Order within the next 6 hrs and your part ships today!
(127)
PartSelect #:PS1485646
Manufacturer #:285753A
This direct drive motor coupling, also known as a coupling kit, is a newer version of the part and is used in your washer. The part includes 1 rubber coupling, 2 drive lugs, and ha...
$20.64
In Stock
Order within the next 6 hrs and your part ships today!
(108)
PartSelect #:PS334310
Manufacturer #:279834
This is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils ...
$28.23
In Stock
Order within the next 6 hrs and your part ships today!
(79)
PartSelect #:PS11741239
Manufacturer #:WP3363394
This direct drive water pump, also known as the washing machine drain pump or washer drain pump, is manufactured for washing machines that do not have belts. This is a genuine Whir...
$38.59
On Order
(86)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$5.12
In Stock
Order within the next 6 hrs and your part ships today!
(85)
PartSelect #:PS334646
Manufacturer #:285805
The water inlet valve on your washing machine is used to fill the tub with cold, warm, or hot water for the wash and rinse cycles. This part could have either a blue or green-color...
$33.82
In Stock
Order within the next 6 hrs and your part ships today!
(78)
PartSelect #:PS347627
Manufacturer #:349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining was...
$21.55
On Order
(56)
PartSelect #:PS334641
Manufacturer #:285785
A clutch assembly is responsible for spinning the basket during the spin cycle in your washing machine. A worn-down clutch can lead to a slower spin which can lead to the machine n...
$51.94
In Stock
Order within the next 6 hrs and your part ships today!
(25)
PartSelect #:PS334180
Manufacturer #:279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder k...
$40.77
On Order
(17)
PartSelect #:PS11743765
Manufacturer #:WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumb...
$17.60
In Stock
Order within the next 6 hrs and your part ships today!
Questions and Answers for RTG5243BL0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: ANTHONY from CHESHIRE, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2550 of 2850 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

No movement from Basket & agitator

  • Customer: Jeff from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 1011 of 1072 people found this instruction helpful
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor co... read more

No heat but would run otherwise

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: Dana from Grassvally, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 783 of 826 people found this instruction helpful
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.

Ascertaining the problem was the most time consuming part.

The actual repair was quite simple and didn't take but 15-20 m... read more