RT6000X92A Murray Tiller - Overview

Hello Alexander, Thank you for your inquiry. We have researched the model number you have provided and show the updated drive belt as part# FIX9947904 and measures approximately 41 inches by 3/8 inches and the updated reverse belt as part# FIX11837051 and it measures approximately 31 inches long by 3/8 inches wide. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Dennis, thank you for the question. The part number PS10042610, that you have mentioned is the dipstick, and it comes with the seal. We hope this information helps!

Hi Larry, Thank you for your question. To replace the belt, first turn off the engine and allow it to cool. Then remove the spark plug wire from the spark plug and secure it. Then remove the belt guard and dirt shield from the bottom of the tiller. Then remove the belt from the engine pulley. Start by forcing the belt down from the engine pulley and slowly rotate the pulley by pulling the starter cord. Then remove the belt from the transmission pulley and push the belt forward and out front of the machine. Then install the new belt onto the transmission pulley and force the belt up onto the engine pulley with the engine starter cord. Then replace the belt guard and dirt shield and reattach the spark plug wire. We hope this helps!