This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator ...
$137.25
In Stock
Order within the next 4 hrs and your part ships today!
This is a crisper drawer for models of Samsung refrigerators. Crisper drawers are used to store fruits and vegetables at a different humidity level from the rest of the fridge to preserve their freshn...
$177.53
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for RS265TDPN
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cassie
January 4, 2020
My ref side is not cooling stays in the upper 40's but freezer working fine
For model number RS265TDPN
Hi Cassie, this is most likely something to do with the evap fan/motor. Check to see if the fan is frozen, you have to defrost your freezer. Thank you for your question and good luck with your repair!
Ref side is not cooling. Temperature stays in upper 40's. Freezer working fine
For model number RS265TDPN
Hi Cassie, this is likely a problem with the evap fan/motor. I would check the fan blade to see if it is frozen and if so defrost the freezer. Thank you for your question and good luck with your repair!
Remove shelves then at bottom is a cover that holds fan in place remove a total of 6 screws. 2 of them are behind lamp lens cover you have to remove lamp lens to see them. Then use hair dryer to melt ice to allow cover to come off. Slow remove cover top left side there are two connector you have to disconnect. Then there are 4 screw to pu
... Read morell fan Assy from cover. 1 screw to get to fan motor.on fan cage remove coil spring then pull cage of . Then unplug connector from fan motor. Note to clean drain hole I use a small hose/ funnel and warm water to open hole back up.